Hi,

I was wondering if there is anybody in the Tacoma to Bremerton area that
makes recorders.

Brian
in Vaughn

Brian Combs wrote:

I was wondering if there is anybody in the Tacoma to Bremerton area that
makes recorders.

Nope, I'm sure not, but I'm glad you mentioned it. I should look into that
myself. Another lathe project, and a potentially very cool one at that.

I wonder how they get the inside taper right? Interesting...

If you make one, let us know how you fare.

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

About 5 years ago, I made a dozen or more Native American flutes. I'm not
sure how a recorder is constructed, but I made my flutes by splitting the
blank, routing the chambers then glueing the pieces back together. The
cutting edge was the hardest part and it was done by hand with a small rasp.

- Ray


"Silvan" wrote in message
...
Brian Combs wrote:

I was wondering if there is anybody in the Tacoma to Bremerton area that
makes recorders.

Nope, I'm sure not, but I'm glad you mentioned it. I should look into
that
myself. Another lathe project, and a potentially very cool one at that.

I wonder how they get the inside taper right? Interesting...

If you make one, let us know how you fare.

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

On Fri, 28 Nov 2003 12:22:53 -0800, "Brian Combs"
wrote:

BETA OR VHS??........lol
Hi,

I was wondering if there is anybody in the Tacoma to Bremerton area that
makes recorders.

Brian
in Vaughn

of course everybody knows that the only way to go is 8 track

Brian

Check out Mick O'donell's techniques using a gun boring rod adapted for
woodturning. I believe he used it for flutes or bagpipes

--
Mark Hancock
South Wales, UK
http://www.markhancock.co.uk