I sometimes end up with pumps that I can't sell because there is something
wrong - one of these was a Thomas 1/3 hp dual wobble piston pump with bad
bearings - well, I finally got annoyed and bought new bearings so now that
part is fixed, but it still doesn't draw a good vacuum because the rings are
worn - Thomas sells a kit for the pump that includes new pistons and sleeves
for $125, but if I buy it and put it in, then I'd have too much invested in
the pump.

So, for anyone who would like a nice 110V vac pump (this is the same model
pump I used for a long time on my lathe) - here's a deal - pump, as is (with
the new bearings) $45. You can order the kit and put it in yourself, or I
can give you the contact info and you can have the kit delivered to me and
I'll put it in for you and then send you the pump.

if that strikes your fancy, just drop me a note by finding my email address
on my web page (below) ... don't reply to the address in this posting, it's
an invalid address I use to reduce spam.

--
Bill
www.wbnoble.com