Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.woodturning
|
|||
|
|||
Return Ping Ralph
If a DVR, remember they've had a bed design change. Not sure how it would
affect centerline or overall height of headstock. |
#2
|
|||
|
|||
According to the spec, it shouldn't matter as both remain with the same dimensions.
|
#3
Posted to rec.crafts.woodturning
|
|||
|
|||
Return Ping Ralph
In article ,
Tony the Turner wrote: According to the spec, it shouldn't matter as both remain with the same dimensions. Thanks George and Tony, as best as I have been able to tell there is little difference (physically) between the DVR and the DVR-XP, it does sound like they changed how the extension attaches though. -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Furnace fuel oil pump return line, install or not? | Home Repair | |||
Room in house is too warm, will adding a return air duct help the airflow in it? | Home Repair | |||
Return ducts in basement reducing heating efficiency?! | Home Repair | |||
Heat banks (again!) | UK diy | |||
how do I ensure there is a cold water path to the boilers return | UK diy |