Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Extractor fan ducting 125mm to 100mm
Hi,
Can you help ? The overhead extractor fan that I've purchased to go over our hob has a plastic adapter on it. This attaches to the extractor hood and goes out on circular 125mm (~5"). Although there are parts an accessories for 125mm there are far more for 100mm (~4") to build the ducting to the outside world. Do adapters exist that take 125mm circular to 100mm circular, or to push my luck :-P 125mm circular with 90 degree bend to rectangular 100mm x 55mm ? - If so where ? I've already found my bodge solution and that is to use a 100mm threaded hose connector with plenty of ducting sealing tape ! But I thought we'd try and do the correct way first. Cheers - Oliver. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
100mm extractor hood ducting problem | UK diy |