Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Asbestos paint?....
On the old house we're renovating at the moment, there is an asbestos stench pipe, the one that connects to the lavvy and vents the fowle gasses to the atmosphere and thus enhances global warming;!. The pipe is in very good nick itself but is a rather sick shade of puce. We want to paint it Black, but would the correct paint be Gloss Black or perhaps something bitumen based like car body sealant?.... TIA -- Tony Sayer |
#2
|
|||
|
|||
tony sayer wrote:
On the old house we're renovating at the moment, there is an asbestos stench pipe, the one that connects to the lavvy and vents the fowle gasses to the atmosphere and thus enhances global warming;!. The pipe is in very good nick itself but is a rather sick shade of puce. We want to paint it Black, but would the correct paint be Gloss Black or perhaps something bitumen based like car body sealant?.... TIA gloss works, but isnt very long lived. I'd go for a much better quality paint, like tar, linseed, or pliolite. NT |
#3
|
|||
|
|||
It was somewhere outside Barstow when tony sayer
wrote: The pipe is in very good nick itself but is a rather sick shade of puce. We want to paint it Black, but would the correct paint be Gloss Black or perhaps something bitumen based like car body sealant?.... Best paint for drainpipes is a bitumen-based steelwork paint. You can get this from a Blacksmith's Outfitters (if you can find one) or where I get mine, which is Chassis Black (by Leyland paints, AFAIR) from a truck parts factor like Edmunds Walker. This isn't a plain bitumen paint - if you use that it has poor adhesion, shrinks with age and cracks into a crackle finish. I'm not sure how this will take to asbestos cement though. All those cement boards are quite alkaline on the surface and they will "burn" most paints that aren't intended for use directly onto masonry. I'd advise something as an undercoat. |
#4
|
|||
|
|||
Andy Dingley wrote:
I'm not sure how this will take to asbestos cement though. All those cement boards are quite alkaline on the surface and they will "burn" most paints that aren't intended for use directly onto masonry. I'd advise something as an undercoat. Such as an alkali resisting primer? - e.g. http://www.decoratingdirect.co.uk/viewprod/t/TORARP/ -- Andy |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Paint formula changes | Home Repair | |||
Camp Painting help Needed ! | Home Repair | |||
Serious question for older d-i-y-ers | UK diy | |||
Benjamin Moore paint types | Home Ownership |