Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Potterton - should electrodes glow red hot?
Hi folks,
I have a potterton netaheat electronic. When it's active, the pilot light passing over the ignition electrodes causes them to glow red hot! Is this normal or should they be adjusted out of the way? Thanks, PhilipM |
#2
|
|||
|
|||
In message , philmcaleese
writes Hi folks, I have a potterton netaheat electronic. When it's active, the pilot light passing over the ignition electrodes causes them to glow red hot! Is this normal or should they be adjusted out of the way? It's a bit of bent metal in a gas flame ... -- geoff |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing my Potterton EP2000 boiler controller with a Horstmann - wiring question ? | UK diy | |||
Potterton EP2002 Controller | UK diy | |||
Potterton Suprima 30 lockout | UK diy | |||
glow worm boiler leaked, water damaged the floor and kitchen units. | UK diy | |||
Is a Glow Worm 18HXI boiler any good? | UK diy |