I have a Strebel Mitel Max combi boiler with an ignition fault. In the manual there is only some minor fault finding guide.
The boiler lights are all ok,
The fan kicks in
The pressure switch operates and sends a signal down but there is no spark on the electrodes.
Would the fault be a new control box or could there be an alternative component fault that may be causing the problem

On Mon, 24 Jan 2005 19:24:03 +0000, adbbass wrote:


I have a Strebel Mitel Max combi boiler with an ignition fault. In the
manual there is only some minor fault finding guide.
The boiler lights are all ok,
The fan kicks in
The pressure switch operates and sends a signal down but there is no
spark on the electrodes.
Would the fault be a new control box or could there be an alternative
component fault that may be causing the problem

Check the ignition terminals and lead first but electronics can and do
fail.


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html