Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
VCR Head Cleaner
Hi folks
Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) Thanks |
#2
|
|||
|
|||
"BigWallop" wrote in message k... Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) Unless it's a fancy one I bet a new VCR from Tesco is cheaper than the head cleaner :-) |
#3
|
|||
|
|||
"Mike" wrote in message ... "BigWallop" wrote in message k... Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) Unless it's a fancy one I bet a new VCR from Tesco is cheaper than the head cleaner :-) If you bought it from somewhere like ASDA, and it is still under gaurantee, take it bake as faulty and they'll exchange it for a newer one or give you your money back. Surprising how many people do that !!!! |
#4
|
|||
|
|||
In article , BigWallop
writes Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) For the best result, take the lid off and do it yourself. Spinning the heads by hand with a piece of clean white paper pressed gently against the drum is a recommended technique. Then clean the capstan, pinch wheel and sound/control heads with isopropanol. -- Tim Mitchell |
#5
|
|||
|
|||
Tim Mitchell wrote:
For the best result, take the lid off and do it yourself. Spinning the heads by hand with a piece of clean white paper pressed gently against the drum is a recommended technique. Then clean the capstan, pinch wheel and sound/control heads with isopropanol. I usually apply a little isopropanol to the paper first, to remove any deposits, then use another piece to "dry" it. It's basically the same method as the paper cleaning tapes... Lee -- Email address is valid, but is unlikely to be read. |
#6
|
|||
|
|||
"Tim Mitchell" wrote in message ... In article , BigWallop writes Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) For the best result, take the lid off and do it yourself. Spinning the heads by hand with a piece of clean white paper pressed gently against the drum is a recommended technique. Then clean the capstan, pinch wheel and sound/control heads with isopropanol. -- Tim Mitchell OOPs and then goes a broken head Bill |
#7
|
|||
|
|||
On Tue, 18 Jan 2005 02:53:21 GMT, "BigWallop"
wrote: Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) Thanks I've always found head cleaners to be like a chocolate teapot. Take the cover off and use cotton buds moistened with isopropanol to clean the head, guides and rotating components in the tape path. -- ..andy To email, substitute .nospam with .gl |
#8
|
|||
|
|||
In article ,
"BigWallop" writes: Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) The first VCR cleaning tape I bought was a cloth one. After having used it, I spent a couple of hours taking the VCR apart so I could use tweezers to remove all the fabric strands caught on the video heads, and never used it again. Now, I take the VCR apart and use cotten buds with alcohol to clean the tape path and drum surface, but carefully avoid the actual heads. I use a cleaning tape (the type which looks like real VCR tape, but is presumably slightly abrasive) to clean the head surface. You can also get head cleaning sticks. You have to be very careful cleaning the heads though as they are extremely fragile. Clean by holding the stick stationary against the drum and rotating the drum back and forth. Applying force to the head surface in any other direction can easily snap the tiny cores in the heads. -- Andrew Gabriel |
#9
|
|||
|
|||
"BigWallop" wrote in message k... Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) Thanks best one I found was the scotch head cleaner, you just play the tape and when the writing on screen is clear and the sound is ok the job is done. mrcheerful |
#10
|
|||
|
|||
mrcheerful . wrote:
"BigWallop" wrote in message k... Hi folks Looking for a decent VCR head cleaner. All suggestions welcome to see if there are any I haven't tried yet. :-) Thanks best one I found was the scotch head cleaner, you just play the tape and when the writing on screen is clear and the sound is ok the job is done. mrcheerful I'll second the Scotch. Works well for normal build up of oxide. Got about 30 VHS at work!! Heavy clogging; go for the cotton buds, but don't be too surprised if that's the end of the recorder. Andrew |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cleaning VCR - need help and a diagram | Electronics Repair | |||
Adjusting audio head on Pana NV-9100 U-Matic | Electronics Repair | |||
Printer | UK diy | |||
Fisher cassette heads | Electronics Repair |