Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Glow worm combi low pressure pressure
i have a glow worm combi and the pressure gauge keeps going to 0.2 bar. The
plumber I spoke to says that the boiler I have should have a pressure of between 1 and 2 bar. I used the refill tap to raise the pressure but after a few minutes this goes back to 0.2-0.3bar. I then noticed outside by a drain pipe hot water was coming out so I thought this is where the hot water is going. How do I stop it from draining and maintain the pressure? Thanks. -- ian to e-mail me, pls. amend the obvious. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Regulator pressure increases over time - why?? | Home Repair | |||
Clunking in combi boiler when tap is closed: due to back pressure? | UK diy | |||
Ravenheat Combi Boiler | UK diy | |||
high combi pressure | UK diy | |||
combi boiler pressure down - help please | UK diy |