Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Built in fridge problem
"Chris Wilson" wrote in message ... Got a 12 year old built in the kitchen units fridge, just a plain fridge, not a fridge freezer. Recently it seems as if it's just not getting cold enough inside. Milk is going off, cold drinks aren't *REALLY* cold, just slightly cooler than room temp. The inside is a one piece plastic moulding, the rear of which quickly acquires a thin coating of ice. So something is cooling the interior, and it *LOOKS* like the fridge should keep things cold. the door is shutting properly, the seal is in good order. I am quite puzzled how there is ice forming, yet the general inside temp seems high. I have a remote sensor outside temperature reader, I'll try putting that inside and get a proper reading, but in the meantime has anyone any ideas? Finally, are all "built in lower work top / cupboards" fridges a standard size and easily purchased from the likes of Comet et cetera? It's the type where the wooden door panel of the kitchen units is clipped to the fridge door itself, so when closed it looks like any other unit. Thanks for any tips. Thanks -- Best regards, Chris. These usually have a cooling fan inside check its running and the vents are not blocked, otherwise its buy a replacement time. Peter |
#2
|
|||
|
|||
HI Chris
On Fri, 26 Nov 2004 16:36:12 -0000, Chris Wilson wrote: Got a 12 year old built in the kitchen units fridge, just a plain fridge, not a fridge freezer. Recently it seems as if it's just not getting cold enough inside. Milk is going off, cold drinks aren't *REALLY* cold, just slightly cooler than room temp. The inside is a one piece plastic moulding, the rear of which quickly acquires a thin coating of ice. So something is cooling the interior, and it *LOOKS* like the fridge should keep things cold. the door is shutting properly, the seal is in good order. I am quite puzzled how there is ice forming, yet the general inside temp seems high. I have a remote sensor outside temperature reader, I'll try putting that inside and get a proper reading, but in the meantime has anyone any ideas? Had a similar problem with our fridge earlier this year (was only about 5 years old) - turned out that the thermostat had failed in a peculiar fashion. Found a chap on Ebay (down in Cornwall) who was selling 'universal' replacement fridge stats - think it cost just over £10 - and was ever so easy to fit...... I'll look out his details if you're interested (turns out I was at primary school with him & his brother some time in the last century g) - I quoted him the model & make & he was able to specify the right unit. Hope this helps Adrian Suffolk UK |
#3
|
|||
|
|||
snip Thanks for the replies, I pulled it out from the units, took the lower front grill off, and using an air line (I run a workshop at home) blew out several years of dust and dog hairs and general detritus. Put a temp probe in it today and it reads about 3.5 degrees C in the free air in the middle. it doesn't have an ice making compartment. Does that sound about right? Thanks for the replies. should be 5deg c or below so it is ok Peter |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Jenn-Air Fridge Door Alignment Problem | Home Repair | |||
A challenge for old house lovers | UK diy | |||
Goldstar CNR-2994P Tuner problem | Electronics Repair | |||
problem | Electronics Repair |