UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Philip
 
Posts: n/a
Default LED lighting

While looking for replacement light bulbs (GU10's) I can accross the
option for an LED version of the bulb.

Are there any other LED bulbs around R63's for example?

Has anyone tried LED bulbds and could they comment on their
suitability in a home environment.

Thanks

Phil
  #2   Report Post  
logized
 
Posts: n/a
Default


"Philip" wrote in message
om...
While looking for replacement light bulbs (GU10's) I can accross the
option for an LED version of the bulb.

Are there any other LED bulbs around R63's for example?

Has anyone tried LED bulbds and could they comment on their
suitability in a home environment.

Thanks

Phil

This site has some MR16 warm white LEDs - they look interesting -
http://www.ultraleds.co.uk/default.php?cPath=50
I have not tried leds for home lighting yet because until recently they were
not really able to compete on light output, light quality and cost.
Now they could be worth considering as they would save power, run cooler and
last far longer than normal bulbs or fluorescents - they may also be useful
for lighting in enclosed spaces where halogens would overheat.
The downside is if they should fail early for any reason, then you lose all
your expected energy savings in the cost of replacements.

Dave


  #3   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default

In article ,
logized wrote:
Now they could be worth considering as they would save power, run cooler
and last far longer than normal bulbs or fluorescents


Don't think there's really any difference in efficiency between them and
fluorescents. And high output ones don't last forever either.

--
*How do you tell when you run out of invisible ink? *

Dave Plowman London SW
To e-mail, change noise into sound.
  #4   Report Post  
Andy Burns
 
Posts: n/a
Default

logized wrote:

The downside is if they should fail early for any reason, then you lose all
your expected energy savings in the cost of replacements.


I noticed a year or so ago that the new buses round here were using
clusters of LEDs for their tail/brake/indicator lights, very good I
thought.

But I have noticed over the past few months that about 1/3 of the
individual LEDs have already blown, seems these ultra bright LEDs are
being pushed too hard, negating the reliability (and corresponding lack
of required maintenance) which was presumably a major factor used to
justify their use? I assume the reduced power consumption compared to
filament lamps is a relatively minor factor given that the alternator is
sucking it's power from the dirty great diesel lump on a bus?

I don't think I've ever seen properly driven LEDs "burn out" anywhere
else, of course the ones from Birkett's I play^H^H^H^Hexperimented with
years ago without using current limiting resistors were a different matter!
  #5   Report Post  
Stefek Zaba
 
Posts: n/a
Default

Andy Burns wrote:


But I have noticed over the past few months that about 1/3 of the
individual LEDs have already blown, seems these ultra bright LEDs are
being pushed too hard, negating the reliability (and corresponding lack
of required maintenance) which was presumably a major factor used to
justify their use? I assume the reduced power consumption compared to
filament lamps is a relatively minor factor given that the alternator is
sucking it's power from the dirty great diesel lump on a bus?

I 'spect you're right about them being overdriven. There's still a win
over single blubs as far as relamping goes, since (as you've observed)
individual LEDs can lose their holy smoke while the rest of the cluster
still gives out useful photons...


  #6   Report Post  
dms1.go-plus.net
 
Posts: n/a
Default

Led lights last a long time and are quite a bit more expensive. However
their light is also very directional so if you wanted a wide beam they would
be no good for you.

Regards John www.a2znorthants.co.uk


"Philip" wrote in message
om...
While looking for replacement light bulbs (GU10's) I can accross the
option for an LED version of the bulb.

Are there any other LED bulbs around R63's for example?

Has anyone tried LED bulbds and could they comment on their
suitability in a home environment.

Thanks

Phil



  #7   Report Post  
TonyK
 
Posts: n/a
Default


"Philip" wrote in message
om...
While looking for replacement light bulbs (GU10's) I can accross the
option for an LED version of the bulb.

Are there any other LED bulbs around R63's for example?

Has anyone tried LED bulbds and could they comment on their
suitability in a home environment.

Thanks

Phil


I tried 12 LED lamps and they were attrocious, in theory replacements for
halogen spots but a complete waste of time. Light was very poor and had a
blue'ish tinge making it look very cold.

Took them back and got £150 refund!


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help Needed, Interior Lighting Albert Home Repair 17 September 29th 04 06:16 PM
Fluorescent lighting? Schism Home Repair 13 June 22nd 04 02:00 AM
Fluorescent lighting advice Paul Moore UK diy 6 February 11th 04 02:16 PM
dimmer switches for multiple lighting zones Seamus Mc Loughlin UK diy 0 February 4th 04 05:42 PM
Dark Kitchen / Track Lighting? Quidnunc Home Repair 12 January 19th 04 12:32 AM


All times are GMT +1. The time now is 11:16 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"