Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On 03/03/2021 18:40, GB wrote:
On 03/03/2021 17:11, JohnP wrote: GB wrote in : On 02/03/2021 16:46, JohnP wrote: Easy job made hard. Tail spilt. So off the Screwfix - all theirs had a compression fitting and I wanted one with a 1'2 inch BSP to screw onto a Isolating Valve. Tried Plumb Centre - same sort of stock Amazon - success. Do you have a linky, please? I really didn't want to faff about changing stuff behind the pedestal. Why don't they make things more readily available to screw onto an isolating valve? https://tinyurl.com/yazsexyd Thanks, but sadly that seems to be a link to your order history, rather than the item. You'll be pleased to know that Amazon doesn't show me your order history. ![]() https://www.bes.co.uk/flat-faced-str...-bsp-pm-23573/ It has a flat face on one end so it doesn't cut into the rubber washer on a "standard" flexi connector end. Also https://www.amazon.co.uk/15mm-Faced-.../dp/B077GCVM3L -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
kitchen mixer flexi tails with female "tap connector" on non-tap end | UK diy | |||
Monobloc tap tails | UK diy | |||
removing and adding kitchen monobloc tap , does tap spanner exist? | UK diy | |||
Monobloc tap | UK diy | |||
Monobloc tap fixing advice | UK diy |