UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1
Default Lamona Rieza Monoblock cold tap leaks

I'm looking to change the washer or Cartridge on this tap as when the cold water is running there is a small leak from the cold turn handle. Ok here's the bit where I need advice, I've removed the screw from the cold side but the handle does not come off. Would this be because of a build up of crud inside or do I need to unscrew anything else, although no other screws or grub screws visible. Is it a case of a bit of force which I've not tried in case something breaks. thanks in advance

--
For full context, visit https://www.homeownershub.com/uk-diy...s-3100525-.htm

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing washers on monoblock mixer tap Dave Farrance UK diy 22 July 11th 19 08:44 PM
Gas leaks and gas leaks and gas leaks Harry Bloomfield[_3_] UK diy 11 November 25th 14 12:20 PM
Leaking monoblock tap Paul Taylor UK diy 5 November 19th 06 01:59 PM
Monoblock tap removal stixwix UK diy 7 September 23rd 06 03:52 PM
Kitchen Monoblock tap Pedge UK diy 2 April 19th 05 03:01 PM


All times are GMT +1. The time now is 03:22 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"