UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 387
Default Shallow tale

about internet failing when a TV is turned on.

Any explanations?

https://www.msn.com/en-gb/entertainm...-brands-welsh-
couple-his-favourite-guests-ever-and-he-has-a-big-surprise-for-them/ar-
BB19kIn0?ocid=msedgntp
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 14,085
Default Shallow tale

On Wed, 23 Sep 2020 10:09:23 GMT, JohnP wrote:

about internet failing when a TV is turned on.

Any explanations?


This the welsh village that has suffered poor internet speeds for 18
months?

xDSL uses carriers every 8.625 kHz from about 8 kHz up to 2.2 MHz,
each one signalling up to 16 bits. It doesn't take much interference
to knock out a carrier or three. MW/LW broadcast stations can do it
easyly, at night foriegn stations come to play as well. A Broadband
noise source can affect all the carriers severly limiting the number
of bits that can be signalled.

SMPSU's are noitorious sources of such RF noise (anything from wall
warts to internal PSU's to LED/CFL lightbulbs) and all the digital
electonics around these days doesn't help. Then you have deliberate
radiation of broadband RF generated by ethernet power line devices.

--
Cheers
Dave.



  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,699
Default Shallow tale

And of course the effect works the other way, if you have adsl overhead
lines going over your property, te burbling hash from the long and medium
wave bands all the way over the 160 metre ham band can be terrible. The
sooner we get rid of it the better. Oh and don't get me started on powerline
adaptors and wall wart interference. At least those plasma tvs are almost
gone with their huge pulses of noise and general hash.
Brian

--
--
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Dave Liquorice" wrote in message
idual.net...
On Wed, 23 Sep 2020 10:09:23 GMT, JohnP wrote:

about internet failing when a TV is turned on.

Any explanations?


This the welsh village that has suffered poor internet speeds for 18
months?

xDSL uses carriers every 8.625 kHz from about 8 kHz up to 2.2 MHz,
each one signalling up to 16 bits. It doesn't take much interference
to knock out a carrier or three. MW/LW broadcast stations can do it
easyly, at night foriegn stations come to play as well. A Broadband
noise source can affect all the carriers severly limiting the number
of bits that can be signalled.

SMPSU's are noitorious sources of such RF noise (anything from wall
warts to internal PSU's to LED/CFL lightbulbs) and all the digital
electonics around these days doesn't help. Then you have deliberate
radiation of broadband RF generated by ethernet power line devices.

--
Cheers
Dave.





  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Shallow tale

On 23/09/2020 11:09, JohnP wrote:
about internet failing when a TV is turned on.

Any explanations?

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch. When my boiler fires up the arc igniter plays
hell with wifi and power over mains..

https://www.msn.com/en-gb/entertainm...-brands-welsh-
couple-his-favourite-guests-ever-and-he-has-a-big-surprise-for-them/ar-
BB19kIn0?ocid=msedgntp



--
Climate is what you expect but weather is what you get.
Mark Twain
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 14,085
Default Shallow tale

On Wed, 23 Sep 2020 11:41:24 +0100, The Natural Philosopher wrote:

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.


Not overly convinced that a single shortish noise event would cause
the the DLM to knock the speed back and for it to recover overnight
to be knocked back the next day. In my experience the DLM needs quite
a prolonged period of noise/disconnections, as in minutes, to kick in
and takes up three days to recover.

A continious broadband noise source would just push the number of
bits each carrier can signal down, thus reducing the total available
throughput. This would manifest itself as speed changes that followed
the level of interference quite quickly. ie Telly on slow, telly off
fast.

When my boiler fires up the arc igniter plays hell with wifi ...


That ought to looked at, the old or new (oil) boiler had no affecct
on the WifI at all. Didn't even make any noise on a MW radio tuned
between stations. I wonder why 612 kHz is mentioned by the Openreach
bods?

--
Cheers
Dave.





  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Shallow tale

On 23/09/2020 12:12, Dave Liquorice wrote:
On Wed, 23 Sep 2020 11:41:24 +0100, The Natural Philosopher wrote:

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.


Not overly convinced that a single shortish noise event would cause
the the DLM to knock the speed back and for it to recover overnight
to be knocked back the next day. In my experience the DLM needs quite
a prolonged period of noise/disconnections, as in minutes, to kick in
and takes up three days to recover.

The story didn't say that.It said that people lost broadband for a short
period every morning

A continious broadband noise source would just push the number of
bits each carrier can signal down, thus reducing the total available
throughput.


It wasnt a 'continuous broadband noise source', it was specifically a
single very powerful burst that splattered the spectrum and knocked
everyone off line for a moment


This would manifest itself as speed changes that followed
the level of interference quite quickly. ie Telly on slow, telly off
fast.


Except it wasn't that.


When my boiler fires up the arc igniter plays hell with wifi ...


That ought to looked at, the old or new (oil) boiler had no affecct
on the WifI at all. Didn't even make any noise on a MW radio tuned
between stations. I wonder why 612 kHz is mentioned by the Openreach
bods?


Perhaps yours is gas, not oil.
And has a pilot light





--
Microsoft : the best reason to go to Linux that ever existed.
  #7   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 5,061
Default Shallow tale

In article ,
The Natural Philosopher wrote:
On 23/09/2020 12:12, Dave Liquorice wrote:
On Wed, 23 Sep 2020 11:41:24 +0100, The Natural Philosopher wrote:

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.


Not overly convinced that a single shortish noise event would cause
the the DLM to knock the speed back and for it to recover overnight
to be knocked back the next day. In my experience the DLM needs quite
a prolonged period of noise/disconnections, as in minutes, to kick in
and takes up three days to recover.

The story didn't say that.It said that people lost broadband for a short
period every morning


That depends on which paper you read. In the Times "As long as the tv set
was on, it was generatingb interference." The article also says that the
interference got into the owner's router and was then fed out onto
tehnphone network.


--


--
from KT24 in Surrey, England
"I'd rather die of exhaustion than die of boredom" Thomas Carlyle
  #8   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Shallow tale

On 23/09/2020 13:48, charles wrote:
In article ,
The Natural Philosopher wrote:
On 23/09/2020 12:12, Dave Liquorice wrote:
On Wed, 23 Sep 2020 11:41:24 +0100, The Natural Philosopher wrote:

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.

Not overly convinced that a single shortish noise event would cause
the the DLM to knock the speed back and for it to recover overnight
to be knocked back the next day. In my experience the DLM needs quite
a prolonged period of noise/disconnections, as in minutes, to kick in
and takes up three days to recover.

The story didn't say that.It said that people lost broadband for a short
period every morning


That depends on which paper you read. In the Times "As long as the tv set
was on, it was generatingb interference."


Not according to El Reg, who specifically IDed it as a short duration
spike ofnoise

The article also says that the
interference got into the owner's router and was then fed out onto
tehnphone network.

Well that might be in some sense true, but it sounds more like ignorant
********.

Newspapers do not employ STEM graduates these days.

And the times produces as much fake science news as the rest, apart from
the guardian which is ALL fake science news...
--
€śThe urge to save humanity is almost always only a false face for the
urge to rule it.€ť
€“ H. L. Mencken
  #9   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 14,085
Default Shallow tale

On Wed, 23 Sep 2020 12:57:38 +0100, The Natural Philosopher wrote:

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.


Not overly convinced that a single shortish noise event would

cause
the the DLM to knock the speed back and for it to recover

overnight
to be knocked back the next day.


The story didn't say that.It said that people lost broadband for a short
period every morning


That's not how I read the first version I saw on the BBC News site a
couple of days ago or the ISPreview version. Got bored reading the
same verbatim (ish) and randomly embroidered press release after
that... B-)

It wasn t a 'continuous broadband noise source', it was specifically a
single very powerful burst that splattered the spectrum and knocked
everyone off line for a moment


But unless that noise burst upset the DLM and it knocked the speed
back people wouldn't notice the short outage and/or complain about
"slow broadband", particulary at 0700 in the morning. My ADSL2+
connection drops occasionally, A&A send me a text when it does. The
text is normally the first thing I know about it, even if I'm using
the net at the time. The connection resyncs at the same speed as it
was (+/= 100 kBps ish) within 60 seconds.

When my boiler fires up the arc igniter plays hell with wifi ...


That ought to looked at, the old or new (oil) boiler had no

affecct
on the WifI at all.


Perhaps yours is gas, not oil.


Er, then why did I write "the old or new (oil) boiler"?

And has a pilot light


Thought pilot lights had been banned ages ago but not having access
to gas for 20 odd years I'm a little behind the times for gas
boilers.

--
Cheers
Dave.



  #10   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 387
Default Shallow tale


Would it have to have been a CRT TV?



  #11   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 5,061
Default Shallow tale

In article l.net,
Dave Liquorice wrote:
On Wed, 23 Sep 2020 12:57:38 +0100, The Natural Philosopher wrote:


https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.

Not overly convinced that a single shortish noise event would

cause
the the DLM to knock the speed back and for it to recover

overnight
to be knocked back the next day.


The story didn't say that.It said that people lost broadband for a
short period every morning


That's not how I read the first version I saw on the BBC News site a
couple of days ago or the ISPreview version. Got bored reading the
same verbatim (ish) and randomly embroidered press release after
that... B-)


It wasn t a 'continuous broadband noise source', it was specifically
a single very powerful burst that splattered the spectrum and
knocked everyone off line for a moment


That is definitely NOT what the Times reported


But unless that noise burst upset the DLM and it knocked the speed
back people wouldn't notice the short outage and/or complain about
"slow broadband", particulary at 0700 in the morning. My ADSL2+
connection drops occasionally, A&A send me a text when it does. The
text is normally the first thing I know about it, even if I'm using
the net at the time. The connection resyncs at the same speed as it
was (+/= 100 kBps ish) within 60 seconds.


When my boiler fires up the arc igniter plays hell with wifi ...

That ought to looked at, the old or new (oil) boiler had no

affecct
on the WifI at all.


Perhaps yours is gas, not oil.


Er, then why did I write "the old or new (oil) boiler"?


And has a pilot light


Thought pilot lights had been banned ages ago but not having access
to gas for 20 odd years I'm a little behind the times for gas
boilers.


my boiler has a pilot light. It was installed in 1989, but I don't think
there has been any retrospective banning - just not used on new boilers.

--
from KT24 in Surrey, England
"I'd rather die of exhaustion than die of boredom" Thomas Carlyle
  #12   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Shallow tale

On 23/09/2020 14:30, Dave Liquorice wrote:
On Wed, 23 Sep 2020 12:57:38 +0100, The Natural Philosopher wrote:

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch.

Not overly convinced that a single shortish noise event would

cause
the the DLM to knock the speed back and for it to recover

overnight
to be knocked back the next day.


The story didn't say that.It said that people lost broadband for a short
period every morning


That's not how I read the first version I saw on the BBC News site a
couple of days ago or the ISPreview version. Got bored reading the
same verbatim (ish) and randomly embroidered press release after
that... B-)

It wasnâ t a 'continuous broadband noise source', it was specifically a
single very powerful burst that splattered the spectrum and knocked
everyone off line for a moment


But unless that noise burst upset the DLM and it knocked the speed
back people wouldn't notice the short outage and/or complain about
"slow broadband", particulary at 0700 in the morning.


If you get a long enough noise burst the connection will in fact drop
and you will get a new attempt to train - possibly at a higher noise
margin, this is very noticeable

My ADSL2+
connection drops occasionally, A&A send me a text when it does. The
text is normally the first thing I know about it, even if I'm using
the net at the time. The connection resyncs at the same speed as it
was (+/= 100 kBps ish) within 60 seconds.

That is just a glitch. My ADSL never dropped at all, although it would
dynamically adjust its bit buckets and connection speed, unless there
was a burst of noise on te line, when I would contact the ISP and get
that sorted.

When my boiler fires up the arc igniter plays hell with wifi ...

That ought to looked at, the old or new (oil) boiler had no

affecct
on the WifI at all.


Perhaps yours is gas, not oil.


Er, then why did I write "the old or new (oil) boiler"?

No idea

And has a pilot light


Thought pilot lights had been banned ages ago but not having access
to gas for 20 odd years I'm a little behind the times for gas
boilers.

Well me too.


--
New Socialism consists essentially in being seen to have your heart in
the right place whilst your head is in the clouds and your hand is in
someone else's pocket.

  #13   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 5,774
Default Shallow tale

On 23/09/2020 12:57, The Natural Philosopher wrote:


It wasnt a 'continuous broadband noise source', it was specifically a
single very powerful burst thatÂ* splattered theÂ* spectrum and knocked
everyone off line for a moment


And would anyone have noticed a short outage at 7am?


--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk
  #14   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Shallow tale

On 23/09/2020 16:52, alan_m wrote:
On 23/09/2020 12:57, The Natural Philosopher wrote:


It wasnt a 'continuous broadband noise source', it was specifically a
single very powerful burst thatÂ* splattered theÂ* spectrum and knocked
everyone off line for a moment


And would anyone have noticed a short outage at 7am?


Someone obviously did.
OTOH it MIGHT have been something in the TV oscillating at MF and
spewing crap out if the aerial.

Linescan is what - 16Khz? - with harmonics going well up.



--
All political activity makes complete sense once the proposition that
all government is basically a self-legalising protection racket, is
fully understood.

  #15   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,159
Default Shallow tale

On 23/09/2020 12:57, The Natural Philosopher wrote:
It wasnt a 'continuous broadband noise source', it was specifically a
single very powerful burst thatÂ* splattered theÂ* spectrum and knocked
everyone off line for a moment


You've believed the media. They got it wrong.

Bill


  #16   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 7,829
Default Shallow tale

williamwright wrote:

The Natural Philosopher wrote:

It wasnt a 'continuous broadband noise source', it was specifically a
single very powerful burst thatÂ* splattered theÂ* spectrum and knocked
everyone off line for a moment


You've believed the media.


The original newspaper reports called it SHINE (the term for a single
burst, not REIN the term for continuous) and the BT engineer on radio2
yesteday said the same ...

They got it wrong.


And you know different because ... ?
  #17   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 166
Default Shallow tale

On 24/09/2020 00:55, williamwright wrote:
On 23/09/2020 12:57, The Natural Philosopher wrote:
It wasnt a 'continuous broadband noise source', it was specifically a
single very powerful burst thatÂ* splattered theÂ* spectrum and knocked
everyone off line for a moment


You've believed the media. They got it wrong.

Bill



I wonder if all the villagers had ADSL provided via overhead phone
lines.....?

This would make them "effective" recieve antennas for anything emitting
signals in the same frequency range as ADSL?

When I cabled up my my house, I used STP cable which is like UTP but
with a metal foil around it.

One end of the metal foil is bonded to earth in the loft.

The purpose was to:

(a) prevent any networking signals emanating and getting into something else
(b) prevent any signals from getting into the ethernet cables and
affecting my home network performance.

It is also Cat 6 rated cable so I can push it to beyond 1 GBit/s if the
occasion ever arises.

There is a lot to be said for having Fibre to the premises, as it would
be immune to electrical and/or RF interference.
  #18   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,213
Default Shallow tale

On 23/09/2020 11:41, The Natural Philosopher wrote:
On 23/09/2020 11:09, JohnP wrote:
about internet failing when a TV is turned on.

Any explanations?

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch. When my boiler fires up the arc igniter plays
hell with wifi and power over mains..

Cheapo plug-in mechanical timers for switching on/off lamps
clobber stb's for a coule of seconds, depending on proximity.

https://www.msn.com/en-gb/entertainm...-brands-welsh-
couple-his-favourite-guests-ever-and-he-has-a-big-surprise-for-them/ar-
BB19kIn0?ocid=msedgntp



Jeremy Vine had the 'expert' from Openreach who tracked it down on his
program today Just after 1PM. Fault was caused by 2nd hand TV/DVD combo
being turned on at the same time every morning, though broadband
download speeds were said to be barely 1 meg anyway in the area.
  #19   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 7,829
Default Shallow tale

Andrew wrote:

Jeremy Vine had the 'expert' from Openreach who tracked it down on his
program today Just after 1PM. Fault was caused by 2nd hand TV/DVD combo
being turned on at the same time every morning


Don't suppose he mentioned whether it gave continuous interference all
the time it was left on, or just a spike at the time it was turned on?

  #20   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 387
Default Shallow tale

Andy Burns wrote in news:ht1nuaF6t2cU1
@mid.individual.net:

Andrew wrote:

Jeremy Vine had the 'expert' from Openreach who tracked it down on his
program today Just after 1PM. Fault was caused by 2nd hand TV/DVD combo
being turned on at the same time every morning


Don't suppose he mentioned whether it gave continuous interference all
the time it was left on, or just a spike at the time it was turned on?



Always amazes me if a luxury house or hotel is being described inevitably a
"Flat Screen TV" gets a mention. As though it is something to yearn for.


  #21   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 43,017
Default Shallow tale

In article ,
JohnP wrote:
Always amazes me if a luxury house or hotel is being described inevitably a
"Flat Screen TV" gets a mention. As though it is something to yearn for.


Can you buy anything other than a flat screen TV these days anyway? And
where there ever any CRT FreeView sets made?

--
*No radio - Already stolen.

Dave Plowman London SW
To e-mail, change noise into sound.
  #22   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,213
Default Shallow tale

On 23/09/2020 21:02, Andy Burns wrote:
Andrew wrote:

Jeremy Vine had the 'expert' from Openreach who tracked it down on his
program today Just after 1PM. Fault was caused by 2nd hand TV/DVD combo
being turned on at the same time every morning


Don't suppose he mentioned whether it gave continuous interference all
the time it was left on, or just a spike at the time it was turned on?


https://www.bbc.co.uk/sounds/play/m000mq3h

Radio 2, 12:00 - 14:00, Jump to 1:35 PM

James Vince, Senior Pro-active Network manager for Openreach
said it was a Singleton Burst of Radio Interference.

I like the comment at 1:44PM about the bloke in Ireland who went
round the village late at night and used his TV remote to turn all
the TV's over to Babestation.
  #23   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,213
Default Shallow tale

On 23/09/2020 21:38, Andrew wrote:
On 23/09/2020 21:02, Andy Burns wrote:
Andrew wrote:

Jeremy Vine had the 'expert' from Openreach who tracked it down on his
program today Just after 1PM. Fault was caused by 2nd hand TV/DVD combo
being turned on at the same time every morning


Don't suppose he mentioned whether it gave continuous interference all
the time it was left on, or just a spike at the time it was turned on?


https://www.bbc.co.uk/sounds/play/m000mq3h

Radio 2, 12:00 - 14:00,Â* Jump to 1:35 PM

James Vince, Senior Pro-active Network manager for Openreach
said it was a Singleton Burst of Radio Interference.

I like the comment at 1:44PM about the bloke in Ireland who went
round the village late at night and used his TV remote to turn all
the TV's over to Babestation.


Also listen from 1:54 onwards
  #24   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,159
Default Shallow tale

On 23/09/2020 11:41, The Natural Philosopher wrote:
Probably an arcing switch. When my boiler fires up the arc igniter plays
hell with wifi and power over mains..


No, not at all relevant. You're generalising from one vaguely relevant
bit of knowledge you've gained from personal experience.

Bill
  #25   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,699
Default Shallow tale

Hmm, I am not so sure, tvs generally are much lower power than thermostats.
A person across the road used to have a plasma, and he used to turn it off
at the wall at night. When it was turned on it would produce a very loud
hummy carrier with harmonics that drifted from the top end of Medium wave
all the way up to around 2.4mhz, which I assume was created by the switch
mode psu running in standby. When it came on to be watched there was also a
hash noise all over the lf bands. Those screens were terrible for
generating crap.
Luckily, most are now dead.
Brian

--
--
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"The Natural Philosopher" wrote in message
...
On 23/09/2020 11:09, JohnP wrote:
about internet failing when a TV is turned on.

Any explanations?

Its all explained in The Register

https://www.theregister.com/2020/09/...oke_broadband/

Probably an arcing switch. When my boiler fires up the arc igniter plays
hell with wifi and power over mains..

https://www.msn.com/en-gb/entertainm...-brands-welsh-
couple-his-favourite-guests-ever-and-he-has-a-big-surprise-for-them/ar-
BB19kIn0?ocid=msedgntp



--
Climate is what you expect but weather is what you get.
Mark Twain





  #26   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 166
Default Shallow tale

On 24/09/2020 08:04, Brian Gaff (Sofa) wrote:
Hmm, I am not so sure, tvs generally are much lower power than thermostats.
A person across the road used to have a plasma, and he used to turn it off
at the wall at night. When it was turned on it would produce a very loud
hummy carrier with harmonics that drifted from the top end of Medium wave
all the way up to around 2.4mhz, which I assume was created by the switch
mode psu running in standby. When it came on to be watched there was also a
hash noise all over the lf bands. Those screens were terrible for
generating crap.
Luckily, most are now dead.
Brian


Are you referring to the TV itself or the TV owner themself?

:-)
  #27   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,213
Default Shallow tale

Don't hold your breath, there was a 2nd hand panny plasma
telly in the BHF shop in Worthing just before lockdown.

Andrew

On 24/09/2020 08:04, Brian Gaff (Sofa) wrote:
Hmm, I am not so sure, tvs generally are much lower power than thermostats.
A person across the road used to have a plasma, and he used to turn it off
at the wall at night. When it was turned on it would produce a very loud
hummy carrier with harmonics that drifted from the top end of Medium wave
all the way up to around 2.4mhz, which I assume was created by the switch
mode psu running in standby. When it came on to be watched there was also a
hash noise all over the lf bands. Those screens were terrible for
generating crap.
Luckily, most are now dead.
Brian


  #28   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 14,085
Default Shallow tale

On Thu, 24 Sep 2020 10:14:12 +0100, Andrew wrote:

Don't hold your breath, there was a 2nd hand panny plasma
telly in the BHF shop in Worthing just before lockdown.


Our plasma set is fine. Doesn't shove out any great amount of RFI.
Certainly not to the extent you can tell if it's on or off by the
noise level in the HF bands.

--
Cheers
Dave.



  #29   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,699
Default Shallow tale

This has been done to death on quite a few newsgroups. Since the bbc story
originally was a bit low on specifics, it could be almost anything really.
Brian

--
--
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"JohnP" wrote in message
...
about internet failing when a TV is turned on.

Any explanations?

https://www.msn.com/en-gb/entertainm...-brands-welsh-
couple-his-favourite-guests-ever-and-he-has-a-big-surprise-for-them/ar-
BB19kIn0?ocid=msedgntp



  #30   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 166
Default Shallow tale

On 24/09/2020 07:56, Brian Gaff (Sofa) wrote:
This has been done to death on quite a few newsgroups. Since the bbc story
originally was a bit low on specifics, it could be almost anything really.
Brian



I did have an occasion where I could not recieve two specific
transponders on Freesat via my domestic IRS system.

I only managed to solve it by either:

Putting the case back on a Freenas Server or by physically increasing
teh distance between the Freenas server and the Multiswitches.

(all of it was in the loft)

S.




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shallow Switch Box John UK diy 17 October 25th 04 03:14 PM
Question about driving a shallow well to about 60 feet Home Repair 4 September 30th 04 04:38 PM
Shallow Receptacle For Under Cabinet LIghting Michael Roback Home Repair 3 May 1st 04 03:48 PM
Shallow and Deep Gouge Difference?? Go NY Giants They Stink, Go Anyway!! Woodturning 4 November 24th 03 06:56 PM
Advice on bathroom lighting in shallow false ceiling [email protected] UK diy 8 October 28th 03 05:54 PM


All times are GMT +1. The time now is 10:28 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"