 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
BSP fitting
Looking for advice on suitability of a BSP fitting.
My need is to fit a 1" BSP male thread into a clearance hole is a thin(ish) plate and fix it there with a nut either side of the plate One of these : https://www.oilybits.com/316-stainle...150lb-bsp.html My question is the Male threads are BSPT (not BSPP) Will a standard 1" BSP nut hold on a 1" BSP tapered thread. I have no experience of Taper threads so unsure. This does not have to be a water tight seal, I can use PTFE is required, my only concern is the physical fitting. (it's blowing low pressure air through fitting) |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1/2 " BSP fitting advice needed | UK diy | |||
| BSP Connector Help | UK diy | |||
| Stupid question of the day.... BSP screw-in plumbing connections | UK diy | |||
| 1/2" bsp tap connectors | UK diy | |||
| Threads - BSP - Parallel - Tapered - BS746 | UK diy | |||
Threaded Mode
