Looking for advice on suitability of a BSP fitting.

My need is to fit a 1" BSP male thread into a clearance hole is a
thin(ish) plate and fix it there with a nut either side of the plate
One of these :
https://www.oilybits.com/316-stainle...150lb-bsp.html

My question is the Male threads are BSPT (not BSPP)
Will a standard 1" BSP nut hold on a 1" BSP tapered thread.

I have no experience of Taper threads so unsure.

This does not have to be a water tight seal, I can use PTFE is required,
my only concern is the physical fitting. (it's blowing low pressure
air through fitting)