Is it OK to cut a rectangular hole in a *wooden* door frame to insert
a metal architrave box [1] for a matching light switch?

(This is to go in the frame between the dining room & pantry/cellar
head to switch on the lights in the pantry & cellar.)

[1] example:
https://www.toolstation.com/metal-box-1-gang/p51346

Thanks.

On 08/04/2020 13:03, Adam Funk wrote:
Is it OK to cut a rectangular hole in a *wooden* door frame to insert
a metal architrave box [1] for a matching light switch?

(This is to go in the frame between the dining room & pantry/cellar
head to switch on the lights in the pantry & cellar.)

[1] example:
https://www.toolstation.com/metal-box-1-gang/p51346

No reason why not if the cable route follows the normal rules...



--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

On Wednesday, 8 April 2020 13:15:04 UTC+1, Adam Funk wrote:
Is it OK to cut a rectangular hole in a *wooden* door frame to insert
a metal architrave box [1] for a matching light switch?

Yes, provided the box isn't recessed too deeply into the wood so there's a gap between its front and the switchplate.

Owain