 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
Joining guttering at 170 degrees
On Wed, 25 Feb 2004 23:47:16 -0000, "Mark" wrote:
Andrew Mawson typed: I have to end join two pieces of standard half round pvc guttering at 170 degrees (wall has a 10 degree kink due to property line) I made my own faced with a similar situation. Cut a _small_ section to required angle, stick ends together with plastic weld and then a line of silicon over the top of the join. Put a standard joiner each end. Its lasted 10 years so far. -- This would be my suggestion. Rick |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Fascias and guttering | UK diy | |||
| Bizarre moving guttering problem | UK diy | |||
| Joining co-axial cable outdoors | UK diy | |||
Hybrid Mode
