Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
I've been asked to provide a hook to hold a door open.
The hook on the attached picture is what's there on a post and I hope to retain that, what I need is the larger bit of hardware that fits on the door. Because the door only goes back so far when open, the distance between the door and post is 18cm, or 15cm between door and hook. I need a hook suited to what's shown on the photo. I've searched online and not seen anything of a similar design. https://1drv.ms/u/s!Al6CjkffKHWUg8Z7UQY7F0-J6KcSfQ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
holding a door for electrical planing | UK diy | |||
Capturing the end of a garage door spring when hook breaks off | Metalworking | |||
Replace the 'hook' velcro on a hook & loop multifunction sanding accessory... | Woodworking | |||
Storm door closer piston isn't holding to door properly | Home Repair | |||
Putting a hook in a steele door | Home Repair |