Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Cuttable plastic sheet to make screw shims
I once had a small plastic sheet that could be cut to make a shim for a screw
going into a large hole. The sheet I saw had ridges and could be cut with scissors. Is this still available? |
#2
Posted to uk.d-i-y
|
|||
|
|||
Cuttable plastic sheet to make screw shims
On 27/10/2019 13:34, Pamela wrote:
I once had a small plastic sheet that could be cut to make a shim for a screw going into a large hole. The sheet I saw had ridges and could be cut with scissors. Is this still available? Like this: https://www.samuelgrant.co.uk/correx...-sheeting/p144 https://www.wickes.co.uk/Proplex-Bla...-2-4m/p/118670 |
#3
Posted to uk.d-i-y
|
|||
|
|||
Cuttable plastic sheet to make screw shims
On 13:54 27 Oct 2019, Richard wrote:
On 27/10/2019 13:34, Pamela wrote: I once had a small plastic sheet that could be cut to make a shim for a screw going into a large hole. The sheet I saw had ridges and could be cut with scissors. Is this still available? Like this: https://www.samuelgrant.co.uk/correx...-sheeting/p144 The ridges were on the outside and there were no open cells within the sheet https://www.wickes.co.uk/Proplex-Bla...heet---2mm-x-1 -2m-x-2-4m/p/118670 It wasn't as thick as either of your examples. The thickness was about 1mm or 2mm. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tapered plastic shims??? | UK diy | |||
Rectangular plastic shims | UK diy | |||
Plastic shims | UK diy | |||
Plastic Shims | UK diy | |||
Plastic shims or shim stock | Woodworking |