Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
vernier-caliper
I've just purchased a vernier-caliper
https://www.screwfix.com/p/magnusson...-caliper/4269v On the packaging it says "Made in China. All figures are approximate" It doesn't give much confidence that the 100mm to 150mm +/-0.03mm figure is accurate! -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
#2
Posted to uk.d-i-y
|
|||
|
|||
vernier-caliper
alan_m pretended :
I've just purchased a vernier-caliper https://www.screwfix.com/p/magnusson...-caliper/4269v On the packaging it says "Made in China. All figures are approximate" It doesn't give much confidence that the 100mm to 150mm +/-0.03mm figure is accurate! Yesterday in Lidl, they had one of these - https://www.screwfix.com/p/magnusson...-caliper/7093v On their reduced shelves at just £5.59 reduced from £7.99. Identical item, just a different badged name. I already had one, but it would have been rude not to get a spare at that price.. |
#3
Posted to uk.d-i-y
|
|||
|
|||
vernier-caliper
In message , Harry Bloomfield
writes alan_m pretended : I've just purchased a vernier-caliper https://www.screwfix.com/p/magnusson...-caliper/4269v On the packaging it says "Made in China. All figures are approximate" It doesn't give much confidence that the 100mm to 150mm +/-0.03mm figure is accurate! Yesterday in Lidl, they had one of these - https://www.screwfix.com/p/magnusson...-caliper/7093v On their reduced shelves at just £5.59 reduced from £7.99. Identical item, just a different badged name. I already had one, but it would have been rude not to get a spare at that price.. Not sure if that is the same one but.. my electronic vernier has a bad habit of flattening the battery (2032?) while unused. There was a thread about slotting the foam wrap to stop them switching on while on the shelf. Perhaps a permanent current draw more likely. I disconnect the battery for storage. Seems OK on accuracy once calibrated. -- Tim Lamb |
#4
Posted to uk.d-i-y
|
|||
|
|||
vernier-caliper
Tim Lamb wrote:
In message , Harry Bloomfield writes alan_m pretended : I've just purchased a vernier-caliper https://www.screwfix.com/p/magnusson...-caliper/4269v On the packaging it says "Made in China. All figures are approximate" It doesn't give much confidence that the 100mm to 150mm +/-0.03mm figure is accurate! Yesterday in Lidl, they had one of these - https://www.screwfix.com/p/magnusson...-caliper/7093v On their reduced shelves at just £5.59 reduced from £7.99. Identical item, just a different badged name. I already had one, but it would have been rude not to get a spare at that price.. Not sure if that is the same one but.. my electronic vernier has a bad habit of flattening the battery (2032?) while unused. There was a thread about slotting the foam wrap to stop them switching on while on the shelf. Perhaps a permanent current draw more likely. I disconnect the battery for storage. Seems OK on accuracy once calibrated. Mine is exactly the same. I always remove the battery cover now for storage. Tim -- Please don't feed the trolls |
#5
Posted to uk.d-i-y
|
|||
|
|||
vernier-caliper
In article ,
Tim Lamb wrote: Not sure if that is the same one but.. my electronic vernier has a bad habit of flattening the battery (2032?) while unused. There was a thread about slotting the foam wrap to stop them switching on while on the shelf. Perhaps a permanent current draw more likely. I disconnect the battery for storage. I'm forever leaving mine on. Mitutoyo brand and pretty old. Doesn't seem to make a difference to battery life which is several years. -- *Why don't sheep shrink when it rains? Dave Plowman London SW To e-mail, change noise into sound. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Thumbscrew for Helios vernier caliper sought | Metalworking | |||
Digital vernier caliper @ Aldi on Sunday | UK diy | |||
Indicator stand question, and vernier height guage question - repairs | Metalworking | |||
Vernier caliper accuracy | Metalworking | |||
Vernier Caliper | Metalworking |