Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
Anyone know where I can get a good quality one at a reasonable price?
Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! |
#2
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On Sunday, 1 September 2019 09:33:10 UTC+1, newshound wrote:
Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Best bet for all tools cheap is your local car boot sale. |
#3
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
newshound wrote:
Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Can you wait? https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 |
#4
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 12:01, harry wrote:
On Sunday, 1 September 2019 09:33:10 UTC+1, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Best bet for all tools cheap is your local car boot sale. Not for one of these. I have a couple of "boxed sets" of assorted small bits, and a couple of "iPhone screwdriver sets" which are typical of eBay / Car Boot, none of them have a decent JIS 000. I expect to pay a bit more for a well machined hardened bit. I don't mind buying a small set although a single would be best. I'm not *completely* convinced by this one https://smile.amazon.co.uk/Screwdriv... teway&sr=8-3 which is why I'd like a recommendation. Radiospares web site is down at the moment otherwise I would look there. |
#5
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 12:17, Andy Burns wrote:
newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Can you wait? https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 Thanks, that looks more like it, and it has a 0000 as well as an 000. About a fiver each. I'll wait a day or so in case anyone else has suggestions. |
#6
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 09:33 1 Sep 2019, newshound wrote:
Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Surely it's time for the Japs to drop JIS screws. This page suggests DIN 5260/ISO 8764-1 is close enough. They may be easier to find although I haven't looked. http://rtstools.com/jis-vs-phillips-...-to-buy-a-jis- screwdriver/ |
#7
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
newshound wrote:
Andy Burns wrote: https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 Thanks, that looks more like it, and it has a 0000 as well as an 000. Tools from engineer.jp are normally well regarded, DZ-02 seems to be a #000, just 42p on rakuten but £17 delivery, unless you can find it elsewhere? |
#8
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 12:32, Pamela wrote:
On 09:33 1 Sep 2019, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Surely it's time for the Japs to drop JIS screws. This page suggests DIN 5260/ISO 8764-1 is close enough. They may be easier to find although I haven't looked. http://rtstools.com/jis-vs-phillips-...-to-buy-a-jis- screwdriver/ Rubbish, Phillips is designed to cam out for automated manufacture. JIS is far superior. And my screws are "old" JIS. |
#9
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On Sun, 01 Sep 2019 12:18:00 +0100, newshound wrote:
On 01/09/2019 12:01, harry wrote: On Sunday, 1 September 2019 09:33:10 UTC+1, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Best bet for all tools cheap is your local car boot sale. Not for one of these. I have a couple of "boxed sets" of assorted small bits, and a couple of "iPhone screwdriver sets" which are typical of eBay / Car Boot, none of them have a decent JIS 000. I expect to pay a bit more for a well machined hardened bit. I don't mind buying a small set although a single would be best. I'm not *completely* convinced by this one https://smile.amazon.co.uk/Screwdriv...0-Pollicis/dp/ B002Q819AO/ref=sr_1_3?keywords=JIS+%23000&qid=1567336592&s=ga teway&sr=8-3 which is why I'd like a recommendation. Radiospares web site is down at the moment otherwise I would look there. I looked for you earlier! Couldn't see anything. It's only a two hour pre-announced maintenance outage. -- My posts are my copyright and if @diy_forums or Home Owners' Hub wish to copy them they can pay me £1 a message. Use the BIG mirror service in the UK: http://www.mirrorservice.org *lightning surge protection* - a w_tom conductor |
#10
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 12:44 1 Sep 2019, newshound wrote:
On 01/09/2019 12:32, Pamela wrote: On 09:33 1 Sep 2019, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Surely it's time for the Japs to drop JIS screws. This page suggests DIN 5260/ISO 8764-1 is close enough. They may be easier to find although I haven't looked. http://rtstools.com/jis-vs-phillips-...-to-buy-a-jis- screwdriver/ Rubbish, Phillips is designed to cam out for automated manufacture. JIS is far superior. And my screws are "old" JIS. What does a camming Phillips design have to do with the author's suggestion to use the new DIN/ISO standard for JIS screws? Perhaps you didn't read further than the name of the link. |
#11
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 09:33, newshound wrote:
Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! If you are desperate you can file/grind the tip of the point off a philips driver to make it fit JIS better. I would think a PZ would work better but I don't have any suitable screws I want to try either on. |
#12
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
"Andy Burns" wrote in message ... newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Can you wait? https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 0 results. |
#13
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 13:23, Pamela wrote:
On 12:44 1 Sep 2019, newshound wrote: On 01/09/2019 12:32, Pamela wrote: On 09:33 1 Sep 2019, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Surely it's time for the Japs to drop JIS screws. This page suggests DIN 5260/ISO 8764-1 is close enough. They may be easier to find although I haven't looked. http://rtstools.com/jis-vs-phillips-...-to-buy-a-jis- screwdriver/ Rubbish, Phillips is designed to cam out for automated manufacture. JIS is far superior. And my screws are "old" JIS. What does a camming Phillips design have to do with the author's suggestion to use the new DIN/ISO standard for JIS screws? Perhaps you didn't read further than the name of the link. Because I've got JIS #1 screws so the DIN won't fit. Perhaps *you* didn't read it: "The JIS standard screwdriver will always outperform a DIN/ISO screw driver in the worst of conditions on a JIS screw, and the same is true in reverse". |
#14
Posted to uk.d-i-y
|
|||
|
|||
More Heavy Trolling by Senile Nym-Shifting Rodent Speed!
On Mon, 2 Sep 2019 04:45:36 +1000, Sewer, better known as cantankerous
trolling senile geezer Rodent Speed, wrote: 0 results. Are you sure, you zero? -- "Anonymous" to trolling senile Rot Speed: "You can **** off as you know less than pig **** you sad little ignorant ****." MID: |
#15
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 16:22, dennis@home wrote:
On 01/09/2019 09:33, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! If you are desperate you can file/grind the tip of the point off a philips driver to make it fit JIS better. I would think a PZ would work better but I don't have any suitable screws I want to try either on. True, but I don't believe any of my current small screwdrivers are hardened. And 000 and 0000 are *tiny*. |
#16
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 12:41, Andy Burns wrote:
newshound wrote: Andy Burns wrote: https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 Thanks, that looks more like it, and it has a 0000 as well as an 000. Tools from engineer.jp are normally well regarded, DZ-02 seems to be a #000, just 42p on rakuten but £17 delivery, unless you can find it elsewhere? Thanks, but think I might go with your other link. :-) |
#17
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
Swera wrote:
Andy Burns wrote: https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 0 results. For me ... "0 results for 153215853302 13 items found from eBay international sellers" with a link to the intended item. It appears eBay have changed their URL format from the one I have bookmarked and this works better https://www.ebay.co.uk/itm/153215853302 |
#18
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 20:39, Andy Burns wrote:
Swera wrote: Andy Burns wrote: https://www.ebay.co.uk/sch/i.html?_nkw=153215853302 0 results. For me ... "0 results for 153215853302 13 items found from eBay international sellers" with a link to the intended item. It appears eBay have changed their URL format from the one I have bookmarked and this works better https://www.ebay.co.uk/itm/153215853302 Ordered a pair, $13. Don't expect to use them often, but sometimes only the right tool will do. The rubber eye-cup on a camera has slightly pinged out of its two-piece holder, and is only going to go back properly by dismantling. |
#19
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 20:04 1 Sep 2019, newshound wrote:
On 01/09/2019 13:23, Pamela wrote: On 12:44 1 Sep 2019, newshound wrote: On 01/09/2019 12:32, Pamela wrote: On 09:33 1 Sep 2019, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! Surely it's time for the Japs to drop JIS screws. This page suggests DIN 5260/ISO 8764-1 is close enough. They may be easier to find although I haven't looked. http://rtstools.com/jis-vs-phillips-...-and-where-to- buy-a-jis-screwdriver/ Rubbish, Phillips is designed to cam out for automated manufacture. JIS is far superior. And my screws are "old" JIS. What does a camming Phillips design have to do with the author's suggestion to use the new DIN/ISO standard for JIS screws? Perhaps you didn't read further than the name of the link. Because I've got JIS #1 screws so the DIN won't fit. Perhaps *you* didn't read it: "The JIS standard screwdriver will always outperform a DIN/ISO screw driver in the worst of conditions on a JIS screw, and the same is true in reverse". I wanted a set of JIS screwdriver a couple of years ago and Amazon or eBay had pitifully little to offer, except the sort of thing you found at a high price. That's why I mentioned "This page suggests DIN 5260/ISO 8764-1 is close enough". It does not say the new DIN specification will not fit. Nor does it say the new DIN spec is the same as Phillips. I wouldn't need a particularly high performance fit to occassionally dismantle and reassemble a Japanese item for repair -- as opposed to those Japanese motor bike enthusiasts who regularly have the same screwdriver problem. You may differ. |
#20
Posted to uk.d-i-y
|
|||
|
|||
JIS #000 screwdriver
On 01/09/2019 20:06, newshound wrote:
On 01/09/2019 16:22, dennis@home wrote: On 01/09/2019 09:33, newshound wrote: Anyone know where I can get a good quality one at a reasonable price? Best I have spotted so far is Amazon which is more than £12 including delivery. It *must* be JIS, not Phillips! If you are desperate you can file/grind the tip of the point off a philips driver to make it fit JIS better. I would think a PZ would work better but I don't have any suitable screws I want to try either on. True, but I don't believe any of my current small screwdrivers are hardened. And 000 and 0000 are *tiny*. I know, I have a PZ 000 and thats small. PZ are closer to JIS than Philips. Philips are designed to cam out when too much force is applied. PZ and JIS don't have the tapered wings that Philips have so don't cam out as easily. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Those 1,000,000,000GPM pumps in New Orleans | Metalworking | |||
What cost 1,000,000 pcs 5' foam eggs? | UK diy | |||
toshiba tv protect code 000, 000 | Electronics Repair | |||
Casting Primetime TV Show Families Who Want to Relocate potential 50,000 to 100,000 | Home Ownership | |||
Help with JIS (Japanese) standards | Metalworking |