The wiring centre for my heating system is in the airing cupboard in an
inaccessible place. Three 2-port zone valves are wired into it. I need
to change the actuator on one of the valves. It would be much easier if
each one had a 5-pin plug and inline socket, so that I wouldn't need to
get to the wiring centre.

The only ones I've found so far is this sort of thing:
https://www.ebay.co.uk/itm/Red-415V-...9357 RJSQbfbw

which would be a bit of an overkill!

Anyone know of anything smaller which is suitable for mains and with at
least 5 pins?
--
Cheers,
Roger
____________
Please reply to Newsgroup. Whilst email address is valid, it is seldom
checked.