The waste disposal unit under my sink has packed up. Flick the wall
switch and all you get is a faint hum, but no grinding of gnashing of
teeth. It was working fine, then the next minute it wasn't. The onlt
thing that went it in between was some manky bits of cauliflower,
which I guess is going to rot if it doesn't come out soon.

Never having got involved in one of these before (it was in the house
when we bought it new about 11 years ago. I'm clueless as to how they
work or why it might not.. It looks to be, although its difficult to
read the labels exactly a Waste Maid 250 1/2hp, if that makes sense.
Is it something that I should leave to an expert, or is it likey to be
something that may be repairable for a half competent novice? Given
its age, should it be replaced anyway?

Thanks for any tips

Brian

bigbrian wrote:

The waste disposal unit under my sink has packed up. Flick the wall
switch and all you get is a faint hum, but no grinding of gnashing of
teeth. It was working fine, then the next minute it wasn't. The onlt
thing that went it in between was some manky bits of cauliflower,
which I guess is going to rot if it doesn't come out soon.

Never having got involved in one of these before (it was in the house
when we bought it new about 11 years ago. I'm clueless as to how they
work or why it might not.. It looks to be, although its difficult to
read the labels exactly a Waste Maid 250 1/2hp, if that makes sense.
Is it something that I should leave to an expert, or is it likey to be
something that may be repairable for a half competent novice? Given
its age, should it be replaced anyway?

They basically consist of soemthing like a food processor down below
the sink through which the water and waste (like your cauliflower)
goes. There is a rotating blade of some sort to chop and mince the
waste so it can be washed away.

The 'hum' you are getting suggests that the motor isn't rotating the
blade, maybe the cauliflower was too much for it and has jammed it.
The obvious thing to check is to see if something has jammed the
blades and, if it has, unblock it.

If you do try and clear it out take great care that it's powered off
when you try and clear it, waste disposal units are made to crunch up
quite a lot so fingers are very vulnerable.

If the rotating parts can still rotate freely but aren't then I fear
the motore has failed in some way, more expenisve and not really
d-i-y.

--
Chris Green

On Thu, 12 Feb 2004 16:09:16 +0000,
wrote:


Never having got involved in one of these before (it was in the house
when we bought it new about 11 years ago. I'm clueless as to how they
work or why it might not..


They usually have a screw or hex fitting in the base which allows you
to manually rotate the cutter disk to unjam it. Before poking
anything in make sure the thing is switched OFF. Sometimes waggling
the disc backwards and forwards on the manual rotation thing unjams
it enough to allow it to get going again. You will need to fish
around for the teaspoon in the cauliflower which probably jammed it.
Make sure the damn thing is really off though unless you want
finger&cauliflower soup.

Removing them is fairly easy - there is a locking collar at the top
which frees it from the sink.

--
Peter Parry.
http://www.wpp.ltd.uk/

On Thu, 12 Feb 2004 18:30:16 +0000, Peter Parry
wrote:

On Thu, 12 Feb 2004 16:09:16 +0000,
wrote:


Never having got involved in one of these before (it was in the house
when we bought it new about 11 years ago. I'm clueless as to how they
work or why it might not..


They usually have a screw or hex fitting in the base which allows you
to manually rotate the cutter disk to unjam it. Before poking
anything in make sure the thing is switched OFF. Sometimes waggling
the disc backwards and forwards on the manual rotation thing unjams
it enough to allow it to get going again. You will need to fish
around for the teaspoon in the cauliflower which probably jammed it.
Make sure the damn thing is really off though unless you want
finger&cauliflower soup.

Removing them is fairly easy - there is a locking collar at the top
which frees it from the sink.

Not a teaspoon, but a conveniently placed removable insert from a
garlic press.....must have fallen in off the draining board.

Problem now solved!

Thanks for your help (and to Chris too)

Brian

Thanks guys.

One year on and this thread helped solve my problem and saved me money (am sure)

All it was was a little piece of bone stuck in the base of the disposal unit. One broken wooden spoon later, I managed to dislodge it and my Wastemaid was as good as new.