Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#11
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On Tuesday, 12 December 2017 03:31:52 UTC, wrote:
I am not familiar with gas valves. Ours has a lever and its position is parallel to the inlet pipe. On many older gas valves the lever can be put on in various positions. If you look at the end of the stem of the valve there is a mark that should be parallel to the pipe when open. Similar to this. But smaller. http://empoweringvalves.com/plug-valve-used/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Smart meters not smart enough | UK diy | |||
Your Smart TV could be hacked a lot more easily than you mightthink | Home Repair | |||
What is smart about a smart DVD player? | Electronics Repair | |||
Smart Tool Level or Smart Level | Metalworking | |||
Capping off burners on steam boiler to reduce BTU output | Home Repair |