On Tue, 21 Nov 2017 17:36:34 +0000, Adrian Caspersz wrote:

On 21/11/17 17:27, mike.jackson wrote:

Replacing belt in VC330 for friend. Stripped it all down - removed motor
assembly.

Problem: I noticed that the base plate assembly "wheel" - which connects to the
motor with the drive belt will not turn easily by hand. I say "wheel" because
it is not just that, it is an assembly with part of it being the drive wheel,
No way to strip down further.

I am not sure what that assembly is - or what is its purpose? It has a patent
number on it - but no more as far as I can see.

My question: what is it - and should the belt drive wheel on it rotate quite
freely.



Pretty clear video here. What is the wheel/bit that is stuck?

How to replace a Flymo belt on a Flymo Turbo Compact 330
https://www.youtube.com/watch?v=bs3y-J6gTdw


Yep - I had watched that video - and decided I can do the repair - that's why
I bought the bits

When I came to do the repair I did not understand what the device was, that the
belt connects to. As I said it is not just a pulley on a spindle - the
spindle passed through a "unit" - like a black box.

I have since concluded that the black box is some sort of magnetic/eddy current
braking mechanism. So I think I have answered my own question.

Cheer