UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 81
Default Titan angle grinder gearbox failure - spare parts?

My Titan 9" grinder has died after very little use - the motor works but
something in the gearbox has failed so the disk isn't driven. Probably a
forlorn hope, but is it possible to get spares anywhere?
It was bought from Screwfix but more than two years ago.
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 10,998
Default Titan angle grinder gearbox failure - spare parts?

I'd have thought that assuming you can prove that it was not misused it
should be that they would give you a new one. Certainly in the past drills
that failed this early were replaced as after all a drill that stops
drilling is no use to anyone, and similar with other power tools.
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!
wrote in message ...
My Titan 9" grinder has died after very little use - the motor works but
something in the gearbox has failed so the disk isn't driven. Probably a
forlorn hope, but is it possible to get spares anywhere?
It was bought from Screwfix but more than two years ago.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another metal cock ring victim (Tenuous angle grinder angle.) Mike Tomlinson UK diy 34 May 8th 17 07:49 AM
Logan QC gearbox parts Terry Coombs[_2_] Metalworking 3 June 16th 13 02:12 AM
Cutting angle iron with an angle grinder harry UK diy 2 June 5th 10 07:48 PM
Cutting angle iron with an angle grinder Jules Richardson UK diy 0 June 5th 10 02:20 PM
Converting your angle grinder to a bench grinder Matty F UK diy 17 July 30th 09 11:12 PM


All times are GMT +1. The time now is 05:41 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"