UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1
Default wf860 with water still in drum

if the sump pump is blocked is it easy to replace?
  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 13,431
Default wf860 with water still in drum

On Sat, 3 Jun 2017 10:43:50 +0100, Bob Minchin
wrote:

wrote:
if the sump pump is blocked is it easy to replace?

Usually but it is normally quite easy to unblock through the filter
opening some where at the bottom the machine on the front. There migth
even be a little manual drain hose there too.
Once unblocked and the rotor turning readily, set to spin only with
nothing in the machine, filter cover off and you should see if the pump
is turning.


+1

(I've had cocktail sticks, coins, keys to bracelets jamming WM drain
pumps).

Cheers, T i m
  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 11,175
Default wf860 with water still in drum

In article ,
T i m writes:
On Sat, 3 Jun 2017 10:43:50 +0100, Bob Minchin
wrote:

wrote:
if the sump pump is blocked is it easy to replace?

Usually but it is normally quite easy to unblock through the filter
opening some where at the bottom the machine on the front. There migth
even be a little manual drain hose there too.
Once unblocked and the rotor turning readily, set to spin only with
nothing in the machine, filter cover off and you should see if the pump
is turning.


+1

(I've had cocktail sticks, coins, keys to bracelets jamming WM drain
pumps).


Hair grips and shirt collar stiffeners in one in a rented house.

Coins can be particularly bad as they can puncture a hole through
the outer drum if they get trapped whilst spinning - apparently not
uncommon according to a Hotpoint engineer some time ago, so I do
make double sure none get into the washing machine.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]
  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 12,364
Default wf860 with water still in drum

On Saturday, 3 June 2017 08:34:49 UTC+1, wrote:
if the sump pump is blocked is it easy to replace?


Yes, whether blocked or not. The question does make me wonder whether all it needs is unblocking.


NT
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
washing machine bearings - hotpoint wf860 sm_jamieson UK diy 9 August 8th 13 03:16 PM
Is East still East & West still West? Musing about salad bowls. Arch Woodturning 8 May 18th 07 02:36 PM
water cooler, water coolers, water dispenser, water dispensers,bottleless water cooler,bottleless water coolers,bottleless water dispenser,bottleless water dispensers water coolers UK diy 3 January 5th 06 08:23 PM
OT STILL AND JUST AS MORONIC AS ANY KANER FOLLOWER OT AND STILL JUST AS STUPID AS IT WAS OT KANERS, KANERS EVERYWHERE AND NOT A ONE WITH A BRAIN CELL! OT BALOGNA FROM ONE BOLOGNA TO ANOTHER BOLOGNA, BOTH KANED TO THE HILT The Concealm Pop Home Repair 1 August 20th 05 05:49 PM
Making a drum sander, problem truing the drum Larry Bud Woodworking 13 February 3rd 05 04:41 PM


All times are GMT +1. The time now is 03:56 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"