Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Another Glue Q
I have 2 plastics I need to glue together
ABS pipe which is inserted into Polypropylene cast female sockets. The fitting is a close fit. Polypropylene is not an easy item to glue .... thought about using Loctite Plastic Bonding System (2-part) http://tinyurl.com/brfak4z It seems capable - but when I Googled the comments were immediate grab, no repositioning .... which would mean being able to push pipes into sockets would be a problem. If it were ABS-ABS then normal solvent would be fine ...but it is no good on Polypropylene |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gorilla Glue vs. Elmers Ultimate Glue Polyurethane? | Home Repair | |||
Glue pot heater for hyde glue - hotplate? | UK diy | |||
Natural, water-resistant glue such as casein or hide glue? | UK diy | |||
Glue the coil to the inverter circuit board? Why?Need glue after the reapir??? | Electronics Repair | |||
Flat-pack furniture. To glue or not to glue? | UK diy |