I need a subtle concealed ceiling junction box, access is only available
from below (flat roof).

Best I can come up with is a plasterboard BESA box and white lid.

http://www.screwfix.com/p/appleby-ci...box-35mm/90517

Has anyone done anything else to conceal a small JB with access from the
ceiling side?

Cheers,
Tim

Reasons:
========
I want to deploy some LED strips as main lighting - something like:

https://www.led-lighthouse.co.uk/led...ip68-nano-tech

enclosed in aluminium channel:

https://www.led-lighthouse.co.uk/led...d-strip-lights


I'm tossing up between RGBWW and just plain warm white (with RGB for
wall wash).

If I go for RGBWW, I have 5 soldered joints on 12mm strip which is about
a 2mm pad on 3mm pitch - ie not a lot and not conducive to large cable
(1mm2 or 1.5mm2 depending on volt drop calcs - this is a 24V system).


So I think I need to take some smaller flyleads straight into a box
where I can joint to the main 5 core supply flex above the ceiling,
using Wagos.

Tim Watts wrote:

I need a subtle concealed ceiling junction box

100mmx100mm access panel?

On 12/06/2016 13:08, Tim Watts wrote:
I need a subtle concealed ceiling junction box, access is only available
from below (flat roof).

Persuade yourself (or management) subtle is less important than safe and
you can never have too many smoke detectors?

--
Robin
reply-to address is (intended to be) valid