UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,066
Default Gas meter ventilation requirement

On Thursday, 11 February 2016 20:32:14 UTC, dennis@home wrote:
On 11/02/2016 19:59, harry wrote:

Modern houses do not have suspended timber floors and the VENTILATED meter box is outside ****-fer-brains.


No, most of them around here have beam and block floors.


How is that relevant to the discussion?

Is that the same as not having a suspended timber floor ****-fer brains?

  #42   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,066
Default Gas meter ventilation requirement

On Thursday, 11 February 2016 21:00:00 UTC, AnthonyL wrote:
On Thu, 11 Feb 2016 12:03:50 -0800 (PST), harry
wrote:

On Thursday, 11 February 2016 12:49:07 UTC, AnthonyL wrote:
On Wed, 10 Feb 2016 20:08:50 +0000, Michael Chare
wrote:

On 10/02/2016 19:26, AnthonyL wrote:
On Wed, 10 Feb 2016 01:56:32 -0800 (PST), harry
wrote:

On Wednesday, 10 February 2016 01:14:13 UTC, Michael Chare wrote:
On 09/02/2016 17:47, AnthonyL wrote:
OUr gas meter is at high level in the pantry of our bungalow. There
is an airbrick at about 4' height which introduces quite a lot of cold
air and dust/dirt and SWIMBO would like to block it off.

Google isn't clear. What and where are the regs applying to it and
more simply can I put a piece of card in front of the airbrick?

The air brick may be because the space is a pantry, and perhaps needs to
be kept cool, rather than because of the presence of the gas meter.

--
Michael Chare

You are full of crap.
http://www.fulcrum.co.uk/expertise/f...16-or-greater/

The ventilation has to be 2% of the ground area of the place the meter is enclosed in.

It took me two minute to find the above.
It's half wits like you causes gas explosions.

Could you clarify how the above url applies to my situation?



It is very possible that your meter is not large enough to need a vent
See https://www.bes.co.uk/products/030.asp for example.


On Wed, 10 Feb 2016 20:11:13 -0000, "Phil L"
wrote:

It has no effect on your situation, Harry hasn't got a clue.

I sort of was hoping for Harry to respond. He surely must know about
all this have made such clear pronouncement following his two minute
gas expert googling course?



Look at the meter boxes ****-fer-brains.
The door has top and bottom ventilation.


That is avoiding my question with regard to the U16 or greater
specification that you cited.

--
AnthonyL


How brain dead can you get?
Any closed space were there is a gas meter needs to be ventilated by modern regulations.
Be it a small box or a room within the house.

That is one of the reasons why gas meters are now in boxes outside.
No-one wants holes in the wall.
  #43   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,236
Default Gas meter ventilation requirement

On Sat, 13 Feb 2016 00:04:43 -0800 (PST), harry
wrote:

On Thursday, 11 February 2016 21:00:00 UTC, AnthonyL wrote:
On Thu, 11 Feb 2016 12:03:50 -0800 (PST), harry
wrote:

On Thursday, 11 February 2016 12:49:07 UTC, AnthonyL wrote:
On Wed, 10 Feb 2016 20:08:50 +0000, Michael Chare
wrote:

On 10/02/2016 19:26, AnthonyL wrote:
On Wed, 10 Feb 2016 01:56:32 -0800 (PST), harry
wrote:

On Wednesday, 10 February 2016 01:14:13 UTC, Michael Chare wrote:
On 09/02/2016 17:47, AnthonyL wrote:
OUr gas meter is at high level in the pantry of our bungalow. There
is an airbrick at about 4' height which introduces quite a lot of cold
air and dust/dirt and SWIMBO would like to block it off.

Google isn't clear. What and where are the regs applying to it and
more simply can I put a piece of card in front of the airbrick?

The air brick may be because the space is a pantry, and perhaps needs to
be kept cool, rather than because of the presence of the gas meter.

--
Michael Chare

You are full of crap.
http://www.fulcrum.co.uk/expertise/f...16-or-greater/

The ventilation has to be 2% of the ground area of the place the meter is enclosed in.

It took me two minute to find the above.
It's half wits like you causes gas explosions.

Could you clarify how the above url applies to my situation?



It is very possible that your meter is not large enough to need a vent
See https://www.bes.co.uk/products/030.asp for example.


On Wed, 10 Feb 2016 20:11:13 -0000, "Phil L"
wrote:

It has no effect on your situation, Harry hasn't got a clue.

I sort of was hoping for Harry to respond. He surely must know about
all this have made such clear pronouncement following his two minute
gas expert googling course?


Look at the meter boxes ****-fer-brains.
The door has top and bottom ventilation.


That is avoiding my question with regard to the U16 or greater
specification that you cited.

--
AnthonyL


How brain dead can you get?
Any closed space were there is a gas meter needs to be ventilated by modern regulations.


Which regulations apply to my meter?

--
AnthonyL
  #44   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,066
Default Gas meter ventilation requirement

On Saturday, 13 February 2016 14:45:16 UTC, AnthonyL wrote:
On Sat, 13 Feb 2016 00:04:43 -0800 (PST), harry
wrote:

On Thursday, 11 February 2016 21:00:00 UTC, AnthonyL wrote:
On Thu, 11 Feb 2016 12:03:50 -0800 (PST), harry
wrote:

On Thursday, 11 February 2016 12:49:07 UTC, AnthonyL wrote:
On Wed, 10 Feb 2016 20:08:50 +0000, Michael Chare
wrote:

On 10/02/2016 19:26, AnthonyL wrote:
On Wed, 10 Feb 2016 01:56:32 -0800 (PST), harry
wrote:

On Wednesday, 10 February 2016 01:14:13 UTC, Michael Chare wrote:
On 09/02/2016 17:47, AnthonyL wrote:
OUr gas meter is at high level in the pantry of our bungalow. There
is an airbrick at about 4' height which introduces quite a lot of cold
air and dust/dirt and SWIMBO would like to block it off.

Google isn't clear. What and where are the regs applying to it and
more simply can I put a piece of card in front of the airbrick?

The air brick may be because the space is a pantry, and perhaps needs to
be kept cool, rather than because of the presence of the gas meter.

--
Michael Chare

You are full of crap.
http://www.fulcrum.co.uk/expertise/f...16-or-greater/

The ventilation has to be 2% of the ground area of the place the meter is enclosed in.

It took me two minute to find the above.
It's half wits like you causes gas explosions.

Could you clarify how the above url applies to my situation?



It is very possible that your meter is not large enough to need a vent
See https://www.bes.co.uk/products/030.asp for example.


On Wed, 10 Feb 2016 20:11:13 -0000, "Phil L"
wrote:

It has no effect on your situation, Harry hasn't got a clue.

I sort of was hoping for Harry to respond. He surely must know about
all this have made such clear pronouncement following his two minute
gas expert googling course?


Look at the meter boxes ****-fer-brains.
The door has top and bottom ventilation.

That is avoiding my question with regard to the U16 or greater
specification that you cited.

--
AnthonyL


How brain dead can you get?
Any closed space were there is a gas meter needs to be ventilated by modern regulations.


Which regulations apply to my meter?

--
AnthonyL


The bit that says this:-
(6) Where any installation pipework is not itself contained in a ventilated duct, no person shall install any installation pipework in any shaft, duct or void which is not adequately ventilated.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GFCI Requirement? Larry[_21_] Home Repair 33 April 28th 12 11:38 AM
Urgent Requirement:-- [email protected] Electronics Repair 0 July 10th 07 11:05 AM
Meter cupboard ventilation Hugh UK diy 5 August 7th 06 08:35 AM
UPDATE: 11 Meter to 10 Meter Yagi Antenna Conversion Brad Electronics Repair 1 June 18th 06 08:49 PM
Odd rivetting requirement ? [email protected] UK diy 9 February 20th 05 11:05 PM


All times are GMT +1. The time now is 11:29 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"