I think I saw one recently while looking for something else but I've no
idea where now.

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

It never ceases to amaze me how many boxes have the organisers and
similar bits and pieces on the outside so that they're inaccessible when
the box is open. So what use are screws unless you've opened the box to
get your screwdriver out?

--
Chris Green
·

On 04/02/2014 09:58, wrote:
I think I saw one recently while looking for something else but I've no
idea where now.

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

It never ceases to amaze me how many boxes have the organisers and
similar bits and pieces on the outside so that they're inaccessible when
the box is open. So what use are screws unless you've opened the box to
get your screwdriver out?


Personally I like the "metal briefcases" which are on offer periodically
from Maplins, these sometimes include a foam inner which you can cut to
fit the drill, charger, and spare battery. Then I use things like
tobacco tins for drill bits etc. The Maplins ones are good because they
have rounded corners. Also they stack together very conveniently.

newshound wrote:
On 04/02/2014 09:58, wrote:
I think I saw one recently while looking for something else but I've no
idea where now.

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

It never ceases to amaze me how many boxes have the organisers and
similar bits and pieces on the outside so that they're inaccessible when
the box is open. So what use are screws unless you've opened the box to
get your screwdriver out?


Personally I like the "metal briefcases" which are on offer periodically
from Maplins, these sometimes include a foam inner which you can cut to
fit the drill, charger, and spare battery. Then I use things like
tobacco tins for drill bits etc. The Maplins ones are good because they
have rounded corners. Also they stack together very conveniently.

Yes, I've done similar for a while by using a cheap aluminium 'suitcase'
with foam in the bottom and compartment boxes fixed to the inside of the
lid but it's now falling apart after several years of use. I could do
the same again but I was wondering if there was something ready-made.

--
Chris Green
·

On 2014-02-04, newshound wrote:

Personally I like the "metal briefcases" which are on offer periodically
from Maplins, these sometimes include a foam inner which you can cut to
fit the drill, charger, and spare battery.

They are practical, although I used to wind a friend up by asking,
"Are you here to fix the photocopier?" whenever he got his toolbox
out.

In message , writes

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

I have a cantilever toolbox that I have had for donkey's years. The
usual blue thing with a sort of hammered enamel finish. I love it, but
it is fairly heavy and, indoors, I'm always terrified I'll swing it into
doors or furniture or something. The toolbox always wins.

So, I thought I would look for a fairly heavy duty plastic equivalent,
but have not seen anything suitable listed as tool box. Have a look at
fishing tackle boxes, which are often large and adaptable. I haven't
made a decision yet.
--
Graeme

News wrote:
In message , writes

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

I have a cantilever toolbox that I have had for donkey's years. The
usual blue thing with a sort of hammered enamel finish. I love it, but
it is fairly heavy and, indoors, I'm always terrified I'll swing it into
doors or furniture or something. The toolbox always wins.

So, I thought I would look for a fairly heavy duty plastic equivalent,
but have not seen anything suitable listed as tool box. Have a look at
fishing tackle boxes, which are often large and adaptable. I haven't
made a decision yet.

Bought one of mine from Poundstretcher but many years ago. About 10" x
24" x 8". Very cheap but surprisingly robust. Has tray inside top which
lifts out.

On 04/02/2014 09:58, wrote:
I think I saw one recently while looking for something else but I've no
idea where now.

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

It never ceases to amaze me how many boxes have the organisers and
similar bits and pieces on the outside so that they're inaccessible when
the box is open. So what use are screws unless you've opened the box to
get your screwdriver out?

I have one big orange "Pirahna" thing with a small parts box on the
outside - but it is detachable. (only don't leave it attached with the
top open and then open the main lid - DAMHIK)

Separate parts boxes that you can sling in a normal toolbox also work.




--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

On 04/02/2014 09:58, wrote:
I think I saw one recently while looking for something else but I've no
idea where now.

I'm after a power tool case or toolbox with an organiser for small parts
(i.e. screws etc.) which is *inside* the case and thus accessible when
the box is open.

It never ceases to amaze me how many boxes have the organisers and
similar bits and pieces on the outside so that they're inaccessible when
the box is open. So what use are screws unless you've opened the box to
get your screwdriver out?

I had an Irwin tool bag which had a plastic organiser in the false base.
Great idea, screws & plugs in the organiser, drill driver & stuff n
the bag.

Trouble was, the weight of the tools caused the base to collapse so you
couldn't slide the organiser out.

Returned it to Axminster who refunded immediately. Irwin don't seem to
make it anymore.

I'd love one that worked.


--
Dave - The Medway Handyman www.medwayhandyman.co.uk