Does anyone know of a thermostatic bath filler tap with shower attachment that will give a reasonable flow rate (for filling the bath) with a pressure of 0.3 to 0.35 Bar?

Alternatively, can anyone recommend a very low pressure-drop temperature limiting valve that could be used in conjunction with a non-thermostatic bath filler?

I have got tired of looking at data sheets which mostly don't contain pressure/flow data. When they do it almost never goes below 0.5 Bar.

John

On 07/11/2013 15:29, wrote:

Does anyone know of a thermostatic bath filler tap with shower
attachment that will give a reasonable flow rate (for filling the
bath) with a pressure of 0.3 to 0.35 Bar?

Alternatively, can anyone recommend a very low pressure-drop
temperature limiting valve that could be used in conjunction with a
non-thermostatic bath filler?

I used a RWC TMV high flow rate blending valve for a "whole house"
feed... That claims to work down to 0.1 bar, and the 22mm version
supposedly will deliver 15 lpm at 0.3

I have got tired of looking at data sheets which mostly don't contain
pressure/flow data. When they do it almost never goes below 0.5
Bar.

Page 9 of this PDF:

http://www.rwc.co.uk/images/pdfs/tmv/TMV3-003.pdf


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

On Thursday, 7 November 2013 17:39:05 UTC, John Rumm wrote:

Page 9 of this PDF:
http://www.rwc.co.uk/images/pdfs/tmv/TMV3-003.pdf

Thanks, that was useful. The Promix 22-2 on p11 looks interesting, but the price is breathtaking:-(

John

On 07/11/2013 19:51, wrote:
On Thursday, 7 November 2013 17:39:05 UTC, John Rumm wrote:

Page 9 of this PDF:
http://www.rwc.co.uk/images/pdfs/tmv/TMV3-003.pdf

Thanks, that was useful. The Promix 22-2 on p11 looks interesting,
but the price is breathtaking:-(

The more "normal" TMV3 I got was about £46


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/