Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the
expensive side.

I'm not fussed about flame sensing or anything fancy as the fridge already
has a thermocouple and I'm happy to turn the igniter on and off manually
once I see the flame is alight.

Tim

On Fri, 9 Aug 2013 16:11:05 +0100, "Tim Downie"
wrote:

Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the
expensive side.

This sort of thing?

http://www.ebay.co.uk/itm/PayandPack-Gas-Grill-Battery-Electric-Button-Spark-Generator-6-outlet-Ignitor-/230809104197?pt=UK_Home_Garden_BBQ_Utensils_Access ories_LE&hash=item35bd4b6f45

Peter Parry wrote:
On Fri, 9 Aug 2013 16:11:05 +0100, "Tim Downie"
wrote:

Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the
expensive side.

This sort of thing?

http://www.ebay.co.uk/itm/PayandPack-Gas-Grill-Battery-Electric-Button-Spark-Generator-6-outlet-Ignitor-/230809104197?pt=UK_Home_Garden_BBQ_Utensils_Access ories_LE&hash=item35bd4b6f45

Now that looks handy (and cheap!). Can't actually see what kind of battery
it uses but I guess consumption won't be great in a campervan.

Many thanks.

Tim

On Fri, 9 Aug 2013 17:17:25 +0100, Tim+
wrote:

Peter Parry wrote:
On Fri, 9 Aug 2013 16:11:05 +0100, "Tim Downie"
wrote:

Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the
expensive side.

This sort of thing?

http://www.ebay.co.uk/itm/PayandPack-Gas-Grill-Battery-Electric-Button-Spark-Generator-6-outlet-Ignitor-/230809104197?pt=UK_Home_Garden_BBQ_Utensils_Access ories_LE&hash=item35bd4b6f45

Now that looks handy (and cheap!). Can't actually see what kind of battery
it uses but I guess consumption won't be great in a campervan.

Many thanks.

Remember these gas-lighters?

http://www.ebay.co.uk/itm/VINTAGE-EV...-/310692370428


--
Frank Erskine

On Fri, 09 Aug 2013 18:54:08 +0100, Frank Erskine
wrote:
Remember these gas-lighters?

http://www.ebay.co.uk/itm/VINTAGE-EV...-/310692370428

That brings back memories!

I recall these used a platinum wire, which was heated by the chunky
battery. The battery heated the wire enough to start catalytic
oxidation of hydrogen, which raised the temperature enough to light
the gas.

But it only worked with gas containing hydrogen like town gas, and
wouldn't work with natural gas (methane), so they wern't used after
the conversion to natural gas in the late 60s.

On Friday 09 August 2013 20:59 Caecilius wrote in uk.d-i-y:

On Fri, 09 Aug 2013 18:54:08 +0100, Frank Erskine
wrote:
Remember these gas-lighters?

http://www.ebay.co.uk/itm/VINTAGE-EV...R-ADVERTISING-
SIGN-/310692370428

That brings back memories!

I recall these used a platinum wire, which was heated by the chunky
battery. The battery heated the wire enough to start catalytic
oxidation of hydrogen, which raised the temperature enough to light
the gas.

But it only worked with gas containing hydrogen like town gas, and
wouldn't work with natural gas (methane), so they wern't used after
the conversion to natural gas in the late 60s.

We had a later one:

http://www.google.co.uk/imgres?um=1&...h&tbn id=1GQ-
rCuxAPXAjM:&imgrefurl=http://www.ebay.co.uk/itm/EVER-READY-NATURAL-COOKER-
CAMPING-COOKER-GAS-LIGHTER-
BOXED-/330913440489&docid=JX5NRPGHs3krxM&itg=1&imgurl=htt p://i.ebayimg.com/00/s/MTYwMFgxMjAw/z/XHEAAMXQxzZReWYs/%2524(KGrHqJ,!l!FFyf5vyM4BReWYr3Ftg~~60_35.JPG&w=2 25&h=300&ei=nU0FUtqwLOib0QXZioGACQ&zoom=1&ved=1t:3 588,r:26,s:0,i:171&iact=rc&page=2&tbnh=192&tbnw=14 2&start=23&ndsp=32&tx=37&ty=109

Don't think the wire was anything special - it glowed red hot.

--
Tim Watts Personal Blog: http://squiddy.blog.dionic.net/

http://www.sensorly.com/ Crowd mapping of 2G/3G/4G mobile signal coverage

Reading this on the web? See:
http://wiki.diyfaq.org.uk/index.php?title=Usenet

On Friday, August 9, 2013 4:37:02 PM UTC+1, Peter Parry wrote:
On Fri, 9 Aug 2013 16:11:05 +0100, "Tim Downie"

wrote:



Our caravan fridge has a piezo igniter that is a bit temperamental. Is it

possible to just replace the sparking unit with a generic 12v electronic

igniter (if such a thing exists)? Electrolux kits seem to be on the

expensive side.



This sort of thing?



http://www.ebay.co.uk/itm/PayandPack-Gas-Grill-Battery-Electric-Button-Spark-Generator-6-outlet-Ignitor-/230809104197?pt=UK_Home_Garden_BBQ_Utensils_Access ories_LE&hash=item35bd4b6f45

Ordered on the 9th from Hong Kong and arrived today. No instructions but pretty self-explanatory once I'd figured out how to put the battery in!

Anyway it's installed now and works like a charm. Being much quieter than the old piezo igniter, you can now hear the gas ignition which makes life a lot easier.

Many thanks for the heads up.

Tim

Tim Downie was thinking very hard :
Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the expensive
side.

I'm not fussed about flame sensing or anything fancy as the fridge already
has a thermocouple and I'm happy to turn the igniter on and off manually once
I see the flame is alight.

Tim

Perfectly do-able, just divert the HT wire from the piezo unit, to the
new igniter. You can buy 12v, 240v and battery versions needing just a
push button switch.

--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk

Is there some fundamental efficiency reason why caravan fridges operate on
gas and not electicity?

Brian

--
From the Sofa of Brian Gaff Reply address is active
"Harry Bloomfield" wrote in message
. uk...
Tim Downie was thinking very hard :
Our caravan fridge has a piezo igniter that is a bit temperamental. Is
it possible to just replace the sparking unit with a generic 12v
electronic igniter (if such a thing exists)? Electrolux kits seem to be
on the expensive side.

I'm not fussed about flame sensing or anything fancy as the fridge
already has a thermocouple and I'm happy to turn the igniter on and off
manually once I see the flame is alight.

Tim

Perfectly do-able, just divert the HT wire from the piezo unit, to the new
igniter. You can buy 12v, 240v and battery versions needing just a push
button switch.

--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk

Brian Gaff wrote:
Is there some fundamental efficiency reason why caravan fridges operate on
gas and not electicity?

Not an efficiency reason, no, as they are actually less energy efficient
and effective than a compressor type.

They use gas because it's available, while there is no guarantee of an
electrical supply in a caravan, and they are also silent in operation.
Most of them will work either on gas or 12 volt power, and some have an
option of 240 volt operation as well.


--
Tciao for Now!

John.

In article ,
Brian Gaff wrote:
Is there some fundamental efficiency reason why caravan fridges operate
on gas and not electicity?

Probably because you can store a lot more energy in gas cylinder than you
can in a similar sized battery. It's also much easier to replace a spent
gas cylinder than a battery.

--
From KT24

Using a RISC OS computer running v5.18

Brian Gaff explained on 10/08/2013 :
Is there some fundamental efficiency reason why caravan fridges operate on
gas and not electicity?

Brian

--
From the Sofa of Brian Gaff Reply address is active
"Harry Bloomfield" wrote in message
. uk...
Tim Downie was thinking very hard :
Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the
expensive side.

I'm not fussed about flame sensing or anything fancy as the fridge already
has a thermocouple and I'm happy to turn the igniter on and off manually
once I see the flame is alight.

Tim

Perfectly do-able, just divert the HT wire from the piezo unit, to the new
igniter. You can buy 12v, 240v and battery versions needing just a push
button switch.

-- Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk



They usually designed to work on three sources - gas, 240v and 12v, but
only the 12v whilst being towed due to the current consumed.

--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk

Brian Gaff explained on 10/08/2013 :
Is there some fundamental efficiency reason why caravan fridges operate
on gas and not electicity?


They usually designed to work on three sources - gas, 240v and 12v, but
only the 12v whilst being towed due to the current consumed.

And all 3 sources are heaters, the fridges are the absorption type, mix of
ammonia and other stuff is circulated around the system of many convoluted
pipes, in and out of large and small pipes to get the stuff into a gas and
back to a liquid and so on,
the heat just makes the liquid move, up a vertical riser tube with the
electric heaters attached (100 - 150 watt heaters depending on the fridge
size, hence why the 12volt one is wired to only run when the vehicles engine
is running)

The gas side has it's flue welded to the main riser pipe, heat rises, so the
liquid rises, at the top of the riser tube it turns 90 degrees, then starts
it's downward travel, into and out of the cabinet, through small pipes and
so on, eventually it reaches the reservoir, and starts journey again....
well, that's one bit of the liquid, it's a continuous motion,

Because the pipes the liquid had to flow through are set at certain angles,
if you park up too far off level the fridge performance suffers, modern
fridges are a lot more tolerant than the older ones, 3 or 4 degrees off
level now, but if you get it off level enough, the liquid can't make it
through the mass of pipes, then you get problems with the liquid boiling and
creating air locks,

Hence the 'advise' for an absorption fridge that's stopped working is to
turn it upside down for a day, allowing the air bubbles to burp into the
reservoir that is now at the top of the system, hopefully when put back the
right way up, the fridge will work again.

The back side of these fridges gets pretty hot, which is why you see those 2
large vents in the side of caravans and motorhomes, one at the bottom and
one above the top of the fridge back, but even with them these fridges can
sometimes suffer in very high ambient temperatures, mine failed to cool
properly in spain during summer, so i changed to a 12 volt compressor fridge
freezer, but i already had 450 watts of solar panels on the roof and 900AH
of batteries onboard, worked brilliantly in any weather, but did pull around
80AH in 24 hours, and in winter the solar panels often didnt put that much
back, so i had to run the genny for a few hours to re-charge the batteries
from the mains charger (40 amp 3 stage jobbie)


Anyhoo, the OP's Q has been answered i think, you can buy single outlet
electric igniters, but they cost more than the cooker multi outlet ones (tho
i found the single outlet ones spark faster than the cooker ones, 3 or 4
sparks a second as opposed to one a second) remember to earth out the unused
spark terminals if you use a multi outlet unit, or they will arc across to
the housing and reduce the spark power on the one connected to the electrode
in the flame path),
just connect 12 volts from the vans battery system via a momentary switch,
and use the existing igniter electrode,

I had a thetford fridge in my motorhome, and that had a flame meter, the
thermocouple was one of those with a junction in it and 2 spade terminals,
i've seen them sold for boilers, a small meter was connected to the
terminals, and the millivolt signal on the thermocouple was displayed on the
meter, just hold in the gas knob in and the igniter button until the meter
needle begins to move, release the ingiter button, keep gas knob in until
the needle is over halfway, then you could let go,

Much easier than kneeling on the floor with the fridge door open, half the
food moved to the floor so you can peer through the flame sight window, and
jabbing the damn peizo button for 5 minutes until it lights, then releasing
the gas knob too soon and seeing the flame go out,

Mind, that was better than in the 60's, where you had to go outside and
remove a cover to spark a lighter style flint wheel to light the gas.

Chris Hogg wrote:
On Fri, 9 Aug 2013 16:11:05 +0100, "Tim Downie"
wrote:

Our caravan fridge has a piezo igniter that is a bit temperamental. Is it
possible to just replace the sparking unit with a generic 12v electronic
igniter (if such a thing exists)? Electrolux kits seem to be on the
expensive side.

I'm not fussed about flame sensing or anything fancy as the fridge already
has a thermocouple and I'm happy to turn the igniter on and off manually
once I see the flame is alight.

Tim

IME piezo igniters are very sensitive to damp/humidity. I have a
couple of hand-held ones and they give a perfectly good spark when
stored in the house, but keep them out in a shed where I have a
gas-fired pottery kiln and where they're needed, and they're useless.
Fortunately the kiln also has a built-in battery operated spark
igniter, runs off a single D-cell. Something like this might do you:
http://tinyurl.com/m6gznsn


Unfortunately the flame is behind a window; visible but not accessible.

Tim