Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Cable connector block on ceramic hob?
Hi folks,
Last year I bought and fitted a Baumatic ceramic hob. I had no probs at all with the standard, traditional connections of cooker switch and cooker cable but when it came to the connection at the hob it was a bit of a puzzle I never resolved satisfactorily,. Though I did mange to get the wires to lodge quite firmly, it was a trial and error affair, as the U shaped brass plates and screws of the connector seemed a bit remote from the cable ends. As there were no apparent entry holes large enough for the wire ends I pushed them behind the brass plates and tightened the screws. I had a heck of a job getting the neutral to grip. Anyway, during recent decorating the cable got snagged and the hob went on the blink. (The neutral wire became dislodged). Can anyone please direct me to some clear instruction on how to wire one of these type of connectors properly? -- Arty Flinders |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fluorescent lights - heat rating of cable? | UK diy | |||
Shower electrical cable | UK diy | |||
Cable - pricing up | UK diy | |||
Routeing Electrical FTE cable | UK diy | |||
PH100 Satellite cable | UK diy |