Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y,uk.telecom.mobile
|
|||
|
|||
Water damaged circuit board
After much poking around, I think I've found the connector that's suffered
some water damage when my iPhone 3GS got drowned recently (connector 4). I can see a bit of white stuff around some of the connections on the motherboard and on the plug. What's the best way to clean this off? Tim |
#2
Posted to uk.d-i-y,uk.telecom.mobile
|
|||
|
|||
Water damaged circuit board
Well I'd say that the damage you will be looking for is what you can't see,
under any components etc. Brian -- From the Bed of Brian Gaff. The email is valid as Blind user. "Tim+" wrote in message ... After much poking around, I think I've found the connector that's suffered some water damage when my iPhone 3GS got drowned recently (connector 4). I can see a bit of white stuff around some of the connections on the motherboard and on the plug. What's the best way to clean this off? Tim |
#3
Posted to uk.d-i-y,uk.telecom.mobile
|
|||
|
|||
Water damaged circuit board
Tim+ wrote:
After much poking around, I think I've found the connector that's suffered some water damage when my iPhone 3GS got drowned recently (connector 4). I can see a bit of white stuff around some of the connections on the motherboard and on the plug. What's the best way to clean this off? I use a fibreglass PCB cleaning brush from Maplin. As Brian has said, though, there may well be damage that's out of sight under the connector. A good look through a high powered magnifying glass may let you see it. If you didn't remove all batteries immediately and dry it quickly, there will be other damage, I'd bet. -- Tciao for Now! John. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Water damaged circuit board
John Williamson wrote:
Tim+ wrote: After much poking around, I think I've found the connector that's suffered some water damage when my iPhone 3GS got drowned recently (connector 4). I can see a bit of white stuff around some of the connections on the motherboard and on the plug. What's the best way to clean this off? I use a fibreglass PCB cleaning brush from Maplin. As Brian has said, though, there may well be damage that's out of sight under the connector. A good look through a high powered magnifying glass may let you see it. If you didn't remove all batteries immediately and dry it quickly, there will be other damage, I'd bet. Ha! Try removing the battery from an iPhone quickly! ;-) Despite this problem, iPhones do seem to survive immersion relatively well compared to some phones. Tim |
#5
Posted to uk.d-i-y,uk.telecom.mobile
|
|||
|
|||
Water damaged circuit board
Tim+ pretended :
After much poking around, I think I've found the connector that's suffered some water damage when my iPhone 3GS got drowned recently (connector 4). I can see a bit of white stuff around some of the connections on the motherboard and on the plug. What's the best way to clean this off? Tim A gentle scrub of the PCB with an old toothbrush. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
#6
Posted to uk.d-i-y,uk.telecom.mobile
|
|||
|
|||
Water damaged circuit board
Harry Bloomfield wrote:
Tim+ pretended : After much poking around, I think I've found the connector that's suffered some water damage when my iPhone 3GS got drowned recently (connector 4). I can see a bit of white stuff around some of the connections on the motherboard and on the plug. What's the best way to clean this off? Tim A gentle scrub of the PCB with an old toothbrush. .....dipped in alcohol -- Ineptocracy (in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers. |
#7
Posted to uk.d-i-y
|
|||
|
|||
Water damaged circuit board
En el artículo 517562564371418490.047669timdownie2003-nospampleaseyahoo
, Tim+ timdownie2003@nospamplease yahoo.co.uk escribió: Despite this problem, iPhones do seem to survive immersion relatively well compared to some phones. Having a minimal number of buttons (no keyboard) helps. -- (\_/) (='.'=) (")_(") |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Repair of the power board from an HP DeskJet, damaged by leakage from capacitors. | Electronics Repair | |||
water-damaged tile board | Home Repair | |||
How to repair damaged game board | Home Repair | |||
can a circuit breaker that tripped, worked properly, be damaged inthe process? | Home Repair |