I have a Zanussi FL1085 Washing Machine.
The Green plastic/Nylon timer cam has broken.
*
I have removed the Timer knob & bush.
Can I access this timer cam without major dismantling?
Do I have to remove the front panel? Or access the cam another way?
Many thanks.
Blod

"blod" wrote in message
...
I have a Zanussi FL1085 Washing Machine.
The Green plastic/Nylon timer cam has broken.
*
I have removed the Timer knob & bush.
Can I access this timer cam without major dismantling?
Do I have to remove the front panel? Or access the cam another way?
Many thanks.
Blod

If it is the bar that runs through the centre of the timer unit, then you
can't really replace them unless you dismantle all the microswitches that
the bar controls.

Inside the timer unit is just like a load of switches that make the things
inside the machine work when they should, and to take one apart and try to
put it together again by hand would be almost impossible. The best you can
do is to try to glue the end back on with some super glue and hope it last
long enough to allow to save up and get a new timer control.


---
www.basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.537 / Virus Database: 332 - Release Date: 06/11/03