Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
With all the bedroom doors closed, my landing has no natural light. A
previous house had 'borrowed' lights fitted over every bedroom door, which resolved the problem. A possible solution to my problem would be to use glass bricks set into the plasterboard wall over each bedroom door. How could these bricks be mounted into a frame and set into the wall neatly? I would be pleased if anyone here has any experience of this task. David |
#2
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On 19/05/2011 22:12, David J wrote:
With all the bedroom doors closed, my landing has no natural light. A previous house had 'borrowed' lights fitted over every bedroom door, which resolved the problem. A possible solution to my problem would be to use glass bricks set into the plasterboard wall over each bedroom door. How could these bricks be mounted into a frame and set into the wall neatly? I would be pleased if anyone here has any experience of this task. David I did this between the bathroom and the landing because we had the same problem. Eight glass bricks from Wickes mounted in a simple wooden frame, and it works nicely. |
#3
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
Jason wrote:
I did this between the bathroom and the landing because we had the same problem. Eight glass bricks from Wickes mounted in a simple wooden frame, and it works nicely. I did that in my bathroom by fitting a non-opening frosted light (ie, sheet of frosted glass 1/4-rounded into a frame). It might look nicer than glass bricks if you make it the same width as the door with appropriate architraving and trim, etc. JGH |
#4
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On May 19, 10:28*pm, jgharston wrote:
Jason wrote: I did this between the bathroom and the landing because we had the same problem. Eight glass bricks from Wickes mounted in a simple wooden frame, and it works nicely. I did that in my bathroom by fitting a non-opening frosted light (ie, sheet of frosted glass 1/4-rounded into a frame). It might look nicer than glass bricks if you make it the same width as the door with appropriate architraving and trim, etc. JGH There are other options fwiw 1. fit glazed doors with acid etched glass - you can see zero through them. 2. False window using fluorescent tubes NT |
#5
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On 20/05/2011 01:27, Tabby wrote:
On May 19, 10:28 pm, wrote: Jason wrote: I did this between the bathroom and the landing because we had the same problem. Eight glass bricks from Wickes mounted in a simple wooden frame, and it works nicely. I did that in my bathroom by fitting a non-opening frosted light (ie, sheet of frosted glass 1/4-rounded into a frame). It might look nicer than glass bricks if you make it the same width as the door with appropriate architraving and trim, etc. JGH There are other options fwiw 1. fit glazed doors with acid etched glass - you can see zero through them. 2. False window using fluorescent tubes 3. Light Pipe Colin Bignell |
#6
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On May 20, 1:46*am, "Nightjar \"cpb\"@" "insertmysurnamehere wrote:
On 20/05/2011 01:27, Tabby wrote: On May 19, 10:28 pm, *wrote: Jason wrote: I did this between the bathroom and the landing because we had the same problem. Eight glass bricks from Wickes mounted in a simple wooden frame, and it works nicely. I did that in my bathroom by fitting a non-opening frosted light (ie, sheet of frosted glass 1/4-rounded into a frame). It might look nicer than glass bricks if you make it the same width as the door with appropriate architraving and trim, etc. JGH There are other options fwiw 1. fit glazed doors with acid etched glass - you can see zero through them. 2. False window using fluorescent tubes 3. Light Pipe I have one of these. Expensive. I had problems with condensation running down the tube & dripping. Had to insulate the metal tube in the end. OK since then. Works good, fresnel lens. Had it for abour four years now. The main difficulty is in fitting the roofmounting, light gathering bit. |
#7
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On May 20, 9:06*am, Huge wrote:
On 2011-05-20, Nightjar "cpb"@ "insertmysurnamehere wrote: On 20/05/2011 01:27, Tabby wrote: On May 19, 10:28 pm, *wrote: Jason wrote: I did this between the bathroom and the landing because we had the same problem. Eight glass bricks from Wickes mounted in a simple wooden frame, and it works nicely. I did that in my bathroom by fitting a non-opening frosted light (ie, sheet of frosted glass 1/4-rounded into a frame). It might look nicer than glass bricks if you make it the same width as the door with appropriate architraving and trim, etc. JGH There are other options fwiw 1. fit glazed doors with acid etched glass - you can see zero through them. 2. False window using fluorescent tubes 3. Light Pipe 4. Drink tea. 5. Press small white switch on the wall and marvel at the wonders of electrickery. |
#8
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On May 19, 10:12*pm, David J wrote:
With all the bedroom doors closed, my landing has no natural light. A previous house had 'borrowed' lights fitted over every bedroom door, which resolved the problem. I knew someone who fitted curtains to theirs. MBQ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Hall & landing light switch puzzle | UK diy | |||
natural light into landing - inspiration ? | UK diy | |||
Landing Light | UK diy | |||
Landing light fitting only registering 120v? | UK diy | |||
Landing Light Switch | UK diy |