Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
Traffic Film Remover or truckwash -I use one made by DEB but there are others out there
Phil |
#2
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]() "PhilC" wrote in message ... Traffic Film Remover or truckwash -I use one made by DEB but there are others out there Phil I use ASDA SmartPrice cream cleaner on a sponge and it doesn't take the shine off of the plastic. Jim |
#3
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
In article ,
"the_constructor" writes: "PhilC" wrote in message ... Traffic Film Remover or truckwash -I use one made by DEB but there are others out there Phil I use ASDA SmartPrice cream cleaner on a sponge and it doesn't take the shine off of the plastic. I would not use a cream (or any loaded) cleaner on PVC - the surface is too fragile. Stick to washing up liquid (splash out on Fairy, rather than some eco/economy/watered-down make). Only if that doesn't work (which probably means the surface it already damaged) would I start considering anything stronger. Also, use a very soft brush or a sponge which won't damage the surface, and keep that well rinsed, so the dirt you have taken off the PVC is not becoming an abrasive itself, and change the water when it gets dirty for same reason. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cleaning PVC windows (the PVC bits) | UK diy | |||
Cleaning windows | UK diy | |||
Cleaning router bits with bearings. | Woodworking | |||
Cleaning blades & bits | Woodworking | |||
Cleaning router bits | Woodworking |