UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 93
Default Titan Basemate Ladder leveler?

On 28 Mar, 14:09, BraileTrail
wrote:
Does anyone have any experience of using one of these?

http://www.hobuk.co.uk/acatalog/Titan-Base-Mate.html


They are superb. My house is on a slope which curves in two
directions, so no two places for putting the ladder foot will have the
same relative heights between the two feet. With the BaseMate you
simply put the ladder in roughly the right place, and then kick the
lever on the foot which is off the ground, and the ladder levels
itself. They are far better than mats or wedges. With those you have
to do a lot of trial and error to get the heights right, and then if
you end up moving the ladder, chances are you have to start all over
again. The BaseMate will also adapt to really big height differences,
such as one foot on level ground, and the other in a trench. The feet
are non-slip, swivel-jointed, and have teeth on their front edge for
digging into rough ground.

Not only is the BaseMate brilliant at what it does, its only ~£30! You
can't go wrong...

dan.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Titan Basemate Ladder leveler? BraileTrail[_2_] UK diy 7 September 19th 15 05:25 AM
Ladder Stabilizer For Extension Ladder Question Robert11 Home Repair 16 October 18th 14 01:07 PM
Titan N-120 [email protected] Home Repair 0 March 21st 08 11:23 PM
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding korak Metalworking 1 January 4th 04 07:25 PM
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding korak Metalworking 1 December 15th 03 05:36 AM


All times are GMT +1. The time now is 02:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"