 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Taps
I'm in need of new bath taps so I trotted off to B&Q and bought a couple of
tap 'inserts'. Is that the right term? The outside diameter of the threads on my taps are approx 1 inch or 26.4mm measured with a vernier. The closest adapter with the B&Q inserts are approx 1.2 inch or 30mm. I'm hoping someone here can tell me what I should ask for when I go to a real plumbers merchant. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 0-80 Thread forming taps vs. Cutting taps | Metalworking | |||
| The Reason Hot Taps Are On The Left And Cold Taps Are On The Right | UK diy | |||
| Taps | UK diy | |||
| Taps | UK diy | |||
| Taps | UK diy | |||
Threaded Mode
