Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Car starter motor.
I'm having problems with the starter motor on the old Rover. It's a fairly
recent recon unit - but has had a fair amount of abuse since I've fitted an after market engine management system which of course produced starting problems until tuned. And even although it's running well now the injector pulses at cranking are set separately so rather hit or miss to adjust for a very cold start. As the O2 sensor can't help with telling you what the mixture is 'till it's running... I've stuck my DC clamp meter (not the most accurate of devices) and looked at the cranking current on a cold day. It's saying 550 amps - close to the battery max - and it's turning over slower than I remember. So I'm guessing at a shorted turn somewhere through overheating. Have had this before. Many Jap cars use a Denso starter which uses a smaller but faster motor and reduction gearing. Said to use a lot less current and produce more torque. And I can buy one with a specially made mounting for my engine. For more than an exchange Lucas one - but not so much as to be out of the question. Seems to me a win win solution as it's much lighter as well. And of course the lower current will give more volts to the ignition which might help too. And if it should fail, I can get a secondhand motor only and fit that to the adaptor plate for much less than the original cost - I'm told they don't fail often so are cheap secondhand. Any advice? -- *Many people quit looking for work when they find a job * Dave Plowman London SW To e-mail, change noise into sound. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
car repair - starter motor won't engage | UK diy | |||
Mag. motor starter or contactor? | Woodworking | |||
Petter/ Lister starter motor | UK diy | |||
Problem with Motor Starter | Metalworking | |||
Motor Starter question | Metalworking |