I need to get to the pump on my SGS69A02 dishwasher - it's making a
screaming noise as it pumps down. I think it's in the base of the
unit. Does anyone know how I'm supposed to access it? I'm assuming
turning it upside down isn't a good idea.

TIA

R.

"TheOldFellow" wrote in message
. ..
I need to get to the pump on my SGS69A02 dishwasher - it's making a
screaming noise as it pumps down. I think it's in the base of the
unit. Does anyone know how I'm supposed to access it? I'm assuming
turning it upside down isn't a good idea.

only if you leave the plates in it

i'd turn it on it's side, then have a look underneath,

On May 20, 10:46 am, "gazz"
wrote:
"TheOldFellow" wrote in message

. ..

I need to get to the pump on my SGS69A02 dishwasher - it's making a
screaming noise as it pumps down. I think it's in the base of the
unit. Does anyone know how I'm supposed to access it? I'm assuming
turning it upside down isn't a good idea.

only if you leave the plates in it

i'd turn it on it's side, then have a look underneath,

Last time I turned my dishwasher on its side, something went up the
pipe to the level sensor, so it wouldn't fill with water again for a
while.

"Matty F" wrote in message
...
On May 20, 10:46 am, "gazz"
wrote:
"TheOldFellow" wrote in message

. ..

I need to get to the pump on my SGS69A02 dishwasher - it's making a
screaming noise as it pumps down. I think it's in the base of the
unit. Does anyone know how I'm supposed to access it? I'm assuming
turning it upside down isn't a good idea.

only if you leave the plates in it

i'd turn it on it's side, then have a look underneath,

Last time I turned my dishwasher on its side, something went up the
pipe to the level sensor, so it wouldn't fill with water again for a
while.


ahhh, you turned it on the wrong side then didnt you
okay then, install a steel I beam in the celing of the kitchen, and use a
block and tackle to raise the dishwasher above head height, so you can work
on it's underside without tilting it at all.

--
Die cut vinyl stickers made to your design (within reason)
Cheap as it's a hobby not a business.

Delete the bits between the ~'s to email me

On Wed, 20 May 2009 14:17:16 +0100
"gazz" wrote:

"Matty F" wrote in message
...
On May 20, 10:46 am, "gazz"
wrote:
"TheOldFellow" wrote in message

. ..

I need to get to the pump on my SGS69A02 dishwasher - it's making a
screaming noise as it pumps down. I think it's in the base of the
unit. Does anyone know how I'm supposed to access it? I'm assuming
turning it upside down isn't a good idea.

only if you leave the plates in it

i'd turn it on it's side, then have a look underneath,

Last time I turned my dishwasher on its side, something went up the
pipe to the level sensor, so it wouldn't fill with water again for a
while.


ahhh, you turned it on the wrong side then didnt you
okay then, install a steel I beam in the celing of the kitchen, and use a
block and tackle to raise the dishwasher above head height, so you can work
on it's underside without tilting it at all.



I was going to ask SWMBO to hold it up for me to work on.
R.