Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
40 and 50mm waste pipe clips - flush fit?
Hi,
Getting near to running my waste pipes. I just noticed that all the pipe clips for ABS waste seem to be designed to stand the pipe off the wall a good 15-20mm. As I'm battening out the entire wall in that area (long airing cupboard) to carry an infinite amount of copper pipe (easier to batten then clip to the wood) can you get simple saddle clips that just hold the pipe against whatever the clip is fixed to? Joints etc would occur between battens. Of course I can fit the clips between battens, but that's defeatist! I've googled on and off for a week but can't find anythign Something like this but bigger: http://www.screwfix.com/prods/19780/...5mm-Pack-of-10 Ta Tim |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
10mm pipe clips | UK diy | |||
Underfloor CH pipes - pipe clips needed? | UK diy | |||
WC overflow going into a sink waste-pipe, soil pipe or shower cubicle? | UK diy | |||
How do I connect a 1.25" PVC-U pipe to the flush 50mm plain female water inlet of a WC pan? | UK diy | |||
chrome plated pipe clips | UK diy |