Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Wall hung cupboard adjusters
Hello,
I need to replace the adjusters on the back of some wall hung cupboards and shelves (actually Tapley units). The adjusters are a two part item on the bottom edge of the shelf/cupboard. The outer part has about a 3/8 inch diameter shallow thread to go into the chipboard/mdf etc edge and the inner part threads into this with a large(ish) 3/4 inch diameter flat plat that pushes against the wall to move the whole lower edge of the shelf to achieve accurate front to back horizontal adjustment of the whole unit. Any suggestions please as to where I can obtain such? Regards, Colin -- Colin Brook - Winchester (UK) Fax:+44(0)8701641293 Mobile:07976258703 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
new boiler-wall hung | UK diy | |||
Wall Hung Toilets | Home Repair | |||
wall hung toilet | Home Ownership | |||
Back to wall WC or Wall Hung? | UK diy | |||
wall-hung bookshelves and cabinets | Woodworking |