I've got a chromed 32mm basin trap but the metal is very thin and a
compression 32mm fitting won't close onto it. The o/d is about 32.5mm
whereas the spec for solvent pipe is 36mm o/d and push-fit pipe is 34mm o/d.

This must be a standard problem with an easy solution for "them as knows".
???

Dave

"NoSpam" wrote in message
...
I've got a chromed 32mm basin trap but the metal is very thin and a
compression 32mm fitting won't close onto it. The o/d is about 32.5mm
whereas the spec for solvent pipe is 36mm o/d and push-fit pipe is 34mm
o/d.

This must be a standard problem with an easy solution for "them as knows".
???

Dave

A universal coupler/fitting is widely available to connect you chrome pipe
to any other type of fitting.

http://www.polypipe.com/polypipe/con...categoryID=312

is but one source.

Heliotrope Smith wrote:
"NoSpam" wrote in message
...
I've got a chromed 32mm basin trap but the metal is very thin and a
compression 32mm fitting won't close onto it. The o/d is about 32.5mm
whereas the spec for solvent pipe is 36mm o/d and push-fit pipe is 34mm
o/d.
This must be a standard problem with an easy solution for "them as knows".
???

Dave

A universal coupler/fitting is widely available to connect you chrome pipe
to any other type of fitting.

http://www.polypipe.com/polypipe/con...categoryID=312

is but one source.


Thanks, but that just looks like a regular compression fitting, they
won't close down sufficiently to seal on the pipe.

Dave