On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25 quid.
Was expecting it to be the usual tacky chinese tat but it is in fact
rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a couple
of radiators, a shoe, and my cat. I wanted to measure the sky as
recommended in other posts, but it's raining here and I don't want to
get the lens all soggy. Maybe I'll find something useful to do with it?
But until then I'll just carry on enjoying checking the temperature of
everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25 quid.
Was expecting it to be the usual tacky chinese tat but it is in fact
rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a couple
of radiators, a shoe, and my cat. I wanted to measure the sky as
recommended in other posts, but it's raining here and I don't want to
get the lens all soggy. Maybe I'll find something useful to do with it?
But until then I'll just carry on enjoying checking the temperature of
everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Bovvered? wrote:
On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25
quid. Was expecting it to be the usual tacky chinese tat but it is
in fact rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a
couple of radiators, a shoe, and my cat. I wanted to measure the
sky as recommended in other posts, but it's raining here and I
don't want to get the lens all soggy. Maybe I'll find something
useful to do with it? But until then I'll just carry on enjoying
checking the temperature of everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Me too!

I do actually use mine a lot.

If I change/move/install a rad I use it as a simple check to make sure all
the rads are at more or less the same temp after refilling the system. Also
enables you to see if a rad needs bleeding - just check top & bottom - you
can do that from the doorway of a room.

Best of all - it impress's the hell out of the punters :-)


--
Dave - The Medway Handyman
www.medwayhandyman.co.uk
01634 717930
07850 597257

On Jan 11, 10:49 pm, "The Medway Handyman"
wrote:
Bovvered? wrote:
On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25
quid. Was expecting it to be the usual tacky chinese tat but it is
in fact rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a
couple of radiators, a shoe, and my cat. I wanted to measure the
sky as recommended in other posts, but it's raining here and I
don't want to get the lens all soggy. Maybe I'll find something
useful to do with it? But until then I'll just carry on enjoying
checking the temperature of everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Me too!

I do actually use mine a lot.

If I change/move/install a rad I use it as a simple check to make sure all
the rads are at more or less the same temp after refilling the system. Also
enables you to see if a rad needs bleeding - just check top & bottom - you
can do that from the doorway of a room.

Best of all - it impress's the hell out of the punters :-)

--
Dave - The Medway Handymanwww.medwayhandyman.co.uk
01634 717930
07850 597257

Heh! I'd ignored this thread, up until now. But given the sheer number
of mundane temperatures mentioned, I suddenly find that I want one!
--
Rob

I use mine for:

Checking circuit breakers to see if they are running too hot
Ditto cables

Behind suspended ceilings to pinpoint heat losses [which usually
indicate holes] when we have to 'gas-seal' a Server room

and to demonstrate to the 'boy' that just because the microwave had
pinged it did not mean that his pie was warmed through
completely....and later to show his mate what temperature his lips had
just experienced!!

On Fri, 11 Jan 2008 15:13:24 -0800 (PST), Rob Hamadi
wrote:

On Jan 11, 10:49 pm, "The Medway Handyman"
wrote:
Bovvered? wrote:
On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25
quid. Was expecting it to be the usual tacky chinese tat but it is
in fact rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a
couple of radiators, a shoe, and my cat. I wanted to measure the
sky as recommended in other posts, but it's raining here and I
don't want to get the lens all soggy. Maybe I'll find something
useful to do with it? But until then I'll just carry on enjoying
checking the temperature of everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Me too!

I do actually use mine a lot.

If I change/move/install a rad I use it as a simple check to make sure all
the rads are at more or less the same temp after refilling the system. Also
enables you to see if a rad needs bleeding - just check top & bottom - you
can do that from the doorway of a room.

Best of all - it impress's the hell out of the punters :-)

--
Dave - The Medway Handymanwww.medwayhandyman.co.uk
01634 717930
07850 597257

Heh! I'd ignored this thread, up until now. But given the sheer number
of mundane temperatures mentioned, I suddenly find that I want one!

Join us, come to the dark side. How hot is your consumer unit? You'll
have to buy one to find out...

In article ,
Bovvered? writes:

Join us, come to the dark side. How hot is your consumer unit? You'll
have to buy one to find out...

MCBs are all at ambient temperature.
RCBO's are all about 5C warmer, but they do that even with no load.
(Didn't take the front off -- I think the backs of the RCBOs are
even warmer.)

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

On Fri, 11 Jan 2008 15:13:24 -0800 (PST), Rob Hamadi wrote:

Heh! I'd ignored this thread, up until now. But given the sheer number
of mundane temperatures mentioned, I suddenly find that I want one!

I'm trying *really* hard to resist, I have a dual input thermcouple
thermomtere for doing rads, it even does the maths for you between the two
sensors. B-)

Maplin stock is now 106 from 150+ on Friday, though I think I'd rather
have the CPC one (at it's low price) more buttons, less sexy.

--
Cheers
Dave. pam is missing e-mail

On Sun, 13 Jan 2008 23:33:25 +0000 (GMT), "Dave Liquorice"
wrote:

I'm trying *really* hard to resist, I have a dual input thermcouple
thermomtere for doing rads, it even does the maths for you between the two
sensors. B-)

When I did mine ('79), I used two thermocouples wired in opposition into a dvm.
Did not have to worry about cold junction compensation as the thermals (at the
DVM) cancelled out.

Geo

On Sun, 13 Jan 2008 23:33:25 +0000, Dave Liquorice wrote:

On Fri, 11 Jan 2008 15:13:24 -0800 (PST), Rob Hamadi wrote:

Heh! I'd ignored this thread, up until now. But given the sheer number
of mundane temperatures mentioned, I suddenly find that I want one!

I'm trying *really* hard to resist, I have a dual input thermcouple
thermomtere for doing rads, it even does the maths for you between the
two sensors. B-)


Well, if sums like 48-37 give you problems, go for it!

;-)

"The Medway Handyman" wrote in message
.uk...
Bovvered? wrote:
On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25
quid. Was expecting it to be the usual tacky chinese tat but it is
in fact rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a
couple of radiators, a shoe, and my cat. I wanted to measure the
sky as recommended in other posts, but it's raining here and I
don't want to get the lens all soggy. Maybe I'll find something
useful to do with it? But until then I'll just carry on enjoying
checking the temperature of everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Me too!

I do actually use mine a lot.

If I change/move/install a rad I use it as a simple check to make sure all
the rads are at more or less the same temp after refilling the system.
Also enables you to see if a rad needs bleeding - just check top &
bottom - you can do that from the doorway of a room.

Best of all - it impress's the hell out of the punters :-)


Even better if the punters have cats to chase the dot.

Adam

On Jan 11, 10:49*pm, "The Medway Handyman"
wrote:
Bovvered? wrote:
On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25
quid. Was expecting it to be the usual tacky chinese tat but it is
in fact rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a
couple of radiators, a shoe, and my cat. I wanted to measure the
sky as recommended in other posts, but it's raining here and I
don't want to get the lens all soggy. Maybe I'll find something
useful to do with it? But until then I'll just carry on enjoying
checking the temperature of everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Me too!

I do actually use mine a lot.

If I change/move/install a rad I use it as a simple check to make sure all
the rads are at more or less the same temp after refilling the system. *Also
enables you to see if a rad needs bleeding - just check top & bottom - you
can do that from the doorway of a room.


It's very interesting to look at the wall temperatures. We are in an
end terrace and the difference between the party wall and the exterior
wall is several degrees C. You can even work out which rooms next have
the heating on in.



Robert

RobertL says...
On Jan 11, 10:49*pm, "The Medway Handyman"
wrote:
Bovvered? wrote:
On Fri, 11 Jan 2008 20:16:39 GMT, PCPaul wrote:

On Fri, 11 Jan 2008 19:52:55 +0000, Phil L wrote:

Bovvered? wrote:
Mine arrived today and what a splendid piece of kit it is for 25
quid. Was expecting it to be the usual tacky chinese tat but it is
in fact rather nice quality.

So far I've measured my hand, the wall, inside of the freezer, a
couple of radiators, a shoe, and my cat. I wanted to measure the
sky as recommended in other posts, but it's raining here and I
don't want to get the lens all soggy. Maybe I'll find something
useful to do with it? But until then I'll just carry on enjoying
checking the temperature of everyday household objects.

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys ;-)

You are a kindred spirit! LOL

Me too!

I do actually use mine a lot.

If I change/move/install a rad I use it as a simple check to make sure all
the rads are at more or less the same temp after refilling the system. *Also
enables you to see if a rad needs bleeding - just check top & bottom - you
can do that from the doorway of a room.


It's very interesting to look at the wall temperatures. We are in an
end terrace and the difference between the party wall and the exterior
wall is several degrees C. You can even work out which rooms next have
the heating on in.



Robert



Mine arrived this morning, so I've been checking
temperatures all over the house, walls, floors, ceilings,
doors, windows, dog, wife, kettle, fridge. It certainly
shows the cold spots where heat is lost.

The hot water cylinder shows 7 degrees C hotter than the
room it is in, so that may benefit from some more
insulation or fitting a cupboard around.

Interestingly the unheated North facing walls upstairs are
a few degrees colder than the outside temperature. Brrrh!

I've not finished insulating the loft yet, and the rooms
below those already insulation clearly keep their heat much
better. (As you'd expect really).

One room upstairs has pine cladding around it (not fitted
by me) and I've been tempted to remove it. However, one
part of wall doesn't have this and is 10 degrees C colder
than every other surface in the room, so the cladding may
be stopping for the time being. Looks like the section of
bare wall just sucks the heat out of the room.
--
David in Normandy

David in Normandy wrote:
Mine arrived this morning, so I've been checking
temperatures all over the house, walls, floors, ceilings,
doors, windows, dog, wife, kettle, fridge. It certainly
shows the cold spots where heat is lost.


After that I just have to ask - is your wife hot? :P

Andy

On Jan 11, 8:16 pm, PCPaul wrote:

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys.

Hmm...
I wonder where my wood-chip wallpaper scratcher tool is.
I haven't seen it in years.

Who do I know that has wood-chip wallpaper?

What can I use as a spray bottle... ah, yes, I remember. An empty
plastic bottle with a small hole in th.....

Anyone here got some wood-chip wallpaper they want removed?

On Mon, 14 Jan 2008 07:49:12 -0800, Weatherlawyer wrote:

On Jan 11, 8:16 pm, PCPaul wrote:

...the hours must just fly by...

There speaks someone who isn't yet old enough to truly appreciate new
toys.

Hmm...
I wonder where my wood-chip wallpaper scratcher tool is. I haven't seen
it in years.

Who do I know that has wood-chip wallpaper?

What can I use as a spray bottle... ah, yes, I remember. An empty
plastic bottle with a small hole in th.....

Anyone here got some wood-chip wallpaper they want removed?

Or, indeed, old toys.

I find whenever I get round to clearing up the darker corners of the shed/
loft/garage I get very quickly derailed into 'Oh I needed that' - and
going off to do the thing that's been waiting for me to find it!