Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Permissible combi boiler connection point (electrical)
I want to have a combi installed in my kitchen. Regards the electrical mains feed, there is a single switched socket near where I want to locate the boiler. I gather that switched sockets are against the rules because they don't completely isolate the boiler. So how about if I knock the protruding part of the switch off and Araldite over it so that it is no longer a *switched* socket? Failing that, there is also an old switched, fused outled which used to be used for a small Baby Belling cooker. I could simply wire it in to that. Would either of these options exempt me from filing a Part-P notification to BCO? Cheers, Martin |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Waterproofing electrical connection | UK diy | |||
combi boiler thermostat connection | UK diy | |||
Electrical Connection Boxes | UK diy | |||
Combi boiler in bathroom - electrical regulations | UK diy | |||
Query: Copper pipe at boiler connection point requirement? | UK diy |