UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 43,017
Default the price of CLS

In article ,
Lobster wrote:
Is it all the same quality, though? Last time I looked at this size in
Wicks it was all about as straight as the average politician...


As with most of the sheds, the problem is that they take in a delivery
of (say) 100 lengths of CLS, but (say) 10% are banana-shaped. So nobody
buys them. When there are only (say) 25 lengths left, they get another
100 delivered, again with 10% knackered. These add to the 10 already
there, so we now have 20 unusable lengths. Next time there's a
delivery, we'll end up with 30 rubbish lengths left on display, etc etc
- which means that unless someone buys bent stuff, the stock levels
won't go down low enough to trigger a new delivery.


Until someone with enough nous goes and clears out the unsellable
rubbish and starts again...


In my case I wanted that size of CLS but didn't need the complete lengths,
as it were, so after a bit of negotiation got what I needed but only
actually paid for the straight parts of the timber. So did my bit for
clearing out the dross. IIRC, they were approx 3 metre lengths with the
end couple of feet only bent, and I got three for the price of one, so
quite a good deal.

--
*Eschew obfuscation *

Dave Plowman London SW
To e-mail, change noise into sound.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
IC Price Database -- You can query price of 1,147,000 IC Types! [email protected] Electronics Repair 0 March 30th 06 03:46 PM
What would you price it at? D Steck Woodworking 3 October 25th 05 03:03 PM
Average price ben UK diy 0 September 13th 05 04:42 PM
Price of used TS. Patrick Bitton Woodworking 1 March 29th 05 10:25 PM
10% below asking price? MM UK diy 64 October 15th 04 11:41 AM


All times are GMT +1. The time now is 08:01 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"