Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hi,
I have a Siemens dishwasher, similar to a SE26T551GB, but the slightly older model (about 3 years old). When a normal programme is selected the machine seems to run through the cycle, but just keeps going. When the door is opened the machine has water, and is washing and the display show 1 minute left (but by the last minute of the cycle the water should have gone), and the machine will stick on 1 minute for ever... When the rinse cycle is selected the machine will empty and cycle perfectly. Is this a common programmer or sensor fault ? How do you get into one of these machines to work on it, i can't seem to get to any of the workings other than the programmer... Any help much appreciated. regards, AbingdonBoy. |
#2
![]() |
|||
|
|||
![]()
Anyone got any ideas ?
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Siemens SE63630 dishwasher disassembly for pump cleaning, advice pls | Home Repair | |||
Siemens dishwasher constantly filling with water | UK diy | |||
Siemens dishwasher | UK diy | |||
Whirlpool Dishwasher Programmer Not Progressing | Home Repair | |||
Problems with Siemens Washing Machine WM53661BY | UK diy |